Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Go Back   Only Cub Cadets > Cub Cadets > IH Cub Cadet Tractors (GT)
Reload this Page Played with the 1200 this weekend.
Register FAQ Calendar

Notices

Reply
Page 1 of 2 1 2
 
Thread Tools Display Modes
  #1  
Old 03-13-2011, 10:02 PM
Battlewagon Battlewagon is offline
Member
  
Join Date: Apr 2010
Location: GA
Posts: 84
Default Played with the 1200 this weekend.
I put a shortblock in this thing bout 8 years ago. Figured it was time to decarbon the chamber. Course I had to modify stuff while I was in there. When I carried all my K321 stuff to the machine shop I had taken an extra head. Had .040 taken off both the extra head and the K321 head. The extra head now resides on the K301. Seems to be much smoother and the throttle response is improved. I also found the muffler was toast. So I put the 1450's muffler on. The 1450 is gonna get a custom built muffler anyhow.

K301 old head on top. Head with #2 is now on the K301. Head on right is going on the K321.


Block top after cleaning.


Piston top, lot's more life in this engine


The mufflers


And a little score this weekend. A stripped 44" deck to replace my rust bucket

Reply With Quote
  #2  
Old 03-13-2011, 10:22 PM
Methos Methos is offline
Banned
  
Join Date: Feb 2010
Location: NC
Posts: 10,941
Default
Those heads look great!
Reply With Quote
  #3  
Old 03-13-2011, 10:26 PM
GoatDriver's Avatar
GoatDriver GoatDriver is offline
New Member
  
Join Date: Feb 2011
Location: Mississippi
Posts: 23
Default
Those heads do look nice!!
Reply With Quote
  #4  
Old 03-13-2011, 10:47 PM
Battlewagon Battlewagon is offline
Member
  
Join Date: Apr 2010
Location: GA
Posts: 84
Default
When I get a chance I will get pics up of the rest of the K321 block and such post machine shop. Bored .020 and a new set of valves, had the intake ground at 30 degrees. Bout the only thing I have left that is preventing me from putting the K321 back together is getting the cash together to send my cam to a place in Ohio to regrind and put an adjustable ignition lobe on. Hope to be going back together in a couple of months.

Can't wait to get the grill and hood back on the 1200 so I can go test the new head out in the lawn. Gonna run it for 20-30 minutes tomorrow and then retorque the headbolts, then put the sheetmetal back on.
Reply With Quote
  #5  
Old 03-13-2011, 11:19 PM
ACecil's Avatar
ACecil ACecil is offline
Grand Member
  
Join Date: Mar 2009
Location: North Carolina
Posts: 23,523
Default
Nice job!
__________________
Allen
Proud owner of my Original and 126!

My Grandpa's Cart
Craftsman Lawn Sweeper
Craftsman Plug Aerator
Reply With Quote
  #6  
Old 03-14-2011, 10:14 AM
JOHN SCHUTTE's Avatar
JOHN SCHUTTE JOHN SCHUTTE is offline
Senior Member
  
Join Date: Oct 2010
Location: Kentucky
Posts: 353
Default
What did you use to clean up the block, piston, and valves? Looks brand new!
__________________
Nemesis
Reply With Quote
  #7  
Old 03-14-2011, 01:16 PM
Battlewagon Battlewagon is offline
Member
  
Join Date: Apr 2010
Location: GA
Posts: 84
Default
Quote:
Originally Posted by JOHN SCHUTTE View Post
What did you use to clean up the block, piston, and valves? Looks brand new!
Brake clean, pocket screwdriver, wire brush and a 3M fiber wheel and my die grinder. Looks kinda like a green scrubby pad.
Reply With Quote
  #8  
Old 03-14-2011, 01:36 PM
JOHN SCHUTTE's Avatar
JOHN SCHUTTE JOHN SCHUTTE is offline
Senior Member
  
Join Date: Oct 2010
Location: Kentucky
Posts: 353
Default
Quote:
Originally Posted by Battlewagon View Post
Brake clean, pocket screwdriver, wire brush and a 3M fiber wheel and my die grinder. Looks kinda like a green scrubby pad.
I remember using them as an automotive tech years ago. We called them Scotch-Loc's. Thanks for the info Battlewagon!
__________________
Nemesis
Reply With Quote
  #9  
Old 03-14-2011, 05:15 PM
Tractor2nv's Avatar
Tractor2nv Tractor2nv is offline
Senior Member
  
Join Date: Dec 2010
Location: Westmoreland,Tennessee
Posts: 359
Default
Clean work! Nicely done...A+++
__________________
Fool me once shame on you,fool me twice...shame on me!
Reply With Quote
  #10  
Old 03-14-2011, 09:35 PM
william1041200's Avatar
william1041200 william1041200 is offline
Senior Member
  
Join Date: Aug 2010
Location: MD
Posts: 1,029
Default
whats the point of an adjustable ignition lobe? If you are using it, then its still for points, and you adjust timing there. I must be missing something.
Reply With Quote
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 05:23 PM.

www.onlycubcadets.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.