![]() |
PLEASE PATRONIZE OUR SPONSORS!
#1
|
|||
|
|||
![]()
How is harvest going in you guys area? I want details! Moisture, yeilds.... It should be pretty cool to see how the different areas of the country are doing. Or maybe even some of you guys not from the US.
We started harvesting on the 27th of September, shelling corn. Started out at around 21-22% moisture. We shelled around 100 acres with the last of it at around 17%. We then tried to move to some later planted corn and the moisture shot to 30%!! ![]() |
#2
|
||||
|
||||
![]()
One of my friends they had some corn at 218 bushels an acre at 19% moisture. Here's a pic of what u don't wanna do!
__________________
Brian April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake! ![]() |
#3
|
|||
|
|||
![]()
This definitely what I DON'T want to be doing..... but I'm afraid that is what we WILL be doing.
Sorry I didn't snap any pics so far. At 100 acres, we were just getting started, so I'll still have plenty of time. I'll get some pics and post them. Pics are always cool guys! |
#4
|
||||
|
||||
![]()
I hope for some good pics here, don't be afraid to share, guys!! The farmer I work for is getting started slow, last I heard he's cracked open a couple corn fields at at around 23% or so, just enough to get the dryer going. Now he's moved on to the neighbors beans at the moment. I'm what you call an "all hands on deck" helper so once the steam starts pouring, I'll be out hauling corn, or running a cart, or ripper, or whatever else the day calls for. Really sucks I can't put the time in like I used to, I really enjoy being out there. Anywho, I'll be sure to snap some good pics to share here
![]()
__________________
-Ryan
![]() ![]() |
#5
|
||||
|
||||
![]()
I'm currently watchly the farmer next door bring in his crop but the shoot on his equipment must not be set right because its shooting over the trailer and onto the ground, going on 45 minutes now I I would have thought he'd notice the trailer isn't filling up.
__________________
Tim Pap's 100 Restored 108 1211 Dual Stick 1050 Pap's 100 restoration thread - http://onlycubcadets.net/forum/showthread.php?t=47965 |
#6
|
||||
|
||||
![]() Quote:
The only problem was he failed to tell me about the winter spring in the one field I had to run the four row Gleaner combine thru. I was going along and everything was fine until the ground broke under the drive wheels. Luckily I was adjusting the header down when it happened so it didn't go all the way to the axles. I was able to get the combine backed out and back onto solid ground but gave that area a wide berth when I finished. I was glad I didn't have to call the big truck garage for their big wrecker as they get $250 just to start it up ![]() |
#7
|
||||
|
||||
![]()
When we still farmed before dad bought a Massey 750 we traded work and a neighbor would combine our crops with a IH 1440 he had duals on it , just two wheel drive and buried that thing up to the axles! Took a 986 and our 886 with chains tied between them to pull it out. Surprised the rear axle didn't get ripped off. Then later dad bought a Massey 750 combine muddhogg 4x4 with rice tires. That thing nothing would stop it! It cut ruts thigh deep in creek bottom ground. Hated disking that ground when it dried!
__________________
Brian April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake! ![]() |
#8
|
||||
|
||||
![]()
I ain't talked to anyone about the moister their getting off the corn, but they are chopping the beat 60 around here, and a couple got the combines out doing their thing.
A lot of the corn was planted late around here in the spring. We have a few wet areas on our land but haven't seen any extra tractors needed, yet.
__________________
Make the best of each day , Todd ![]() Original's Face Lift thread.http://www.onlycubcadets.net/forum/s...ad.php?t=34439 (O) Start to Finish video.https://www.youtube.com/watch?v=GAoUNNiLwKs Wheel Around videohttps://www.youtube.com/watch?v=XUL-m6Bramk They can't all be turn key! ![]() |
#9
|
||||
|
||||
![]()
Guys around here have been taking the beans off for the last couple weeks, my Uncles chopped a little corn for the silo a couple weeks ago but I haven't seen anyone with a corn head on yet.
I wouldn't mind getting some seat time again but no one I know really needs the help anymore. I used to get a lot of time in during harvest & spring planting. Miss the roar of a turbodiesel at WOT......
__________________
RUN IN THE RED 782 w/50c deck (red); 782 dual stick, 44c deck (y/w); 1050 w/38c deck; 1864 w/54" GT deck; 1872 project Cub Cadet Pro Z 560 L 42" power angle snowblade, #2 tiller, 2-QA42a snowthrowers, 450 thrower, #2 cart; 54" Haban blade; Brinly box blade, 48" dethatcher, moldboard plow; Agri-Fab sweeper 1200, 1863, 1864 parts machines |
#10
|
|||
|
|||
![]()
Olds: Did the guy ever figure out he was missing the wagon?
Well, still raining here. Going up to the farm this afternoon to put a new Whopper Hopper on one of the combines. Figured it would help be able to make more rounds since we probably won't be able to use the auger cart now. ![]() Keep the stories and comments coming! ![]() |
![]() |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.