|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
08-19-2014, 04:43 PM
|
|||
|
|||
Rear Axle Seals
Both rear axle seals are leaking on my 122. Replacing the seals are not a problem to do, it's the other parts that need to be replaced while its tore down. I've found all the parts except the axle bushing (part# 381664-R2). It's a bronze bushing & could be the reason for the seals to leak. I was wondering if anyone might have any ideas as to where I could get them or possibly make them?
|
|
#2
08-19-2014, 04:52 PM
|
|||
|
|||
|
You could probably have one made......
I'd just upgrade to the axle with the needle bearing. One of the sponsors can hook you up I'm sure. Much better set up, the bearing is. I do not know if you can just use the bearing instead of the bushing...... someone here will know. I just know that in the next tractor series they went to a bearing. Don't know if the tubes are different.  Axles are the same.
|
|
#3
08-19-2014, 07:22 PM
|
||||
|
||||
|
the bore in the needle bearing housings is larger. you should be able to measure up the bushing and get a replacement from a bearing shop. should be a common size, axles were pretty much the same except for external brake having rotors on them
|
|
#6
08-19-2014, 10:10 PM
|
|||
|
|||
|
I have seen the needle bearings & it looked like a better setup to me but it didn't show em in the parts blowup & I didn't know if they were the same size as the bushings. It's just my guess but I'd bet those bushings have never been replaced & it's a 1966 model so I'm sure there's some wear. I just didn't want to tear it down & not replace everything that I could.
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
