Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Go Back   Only Cub Cadets > Cub Cadets > IH Cub Cadet Tractors (GT)
Reload this Page K301 Flywheel Removal
Register FAQ Calendar

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 05-27-2011, 06:48 AM
nycub122 nycub122 is offline
Member
  
Join Date: Nov 2010
Location: Spencer, New York
Posts: 46
Default K301 Flywheel Removal
How do you hold the K301 flywheel to loosen/tighten the flywheel nut? I know that the Service Manual says to use a strap wrench, but I don't believe that is possible, since the blower housing and grass screen/drive pulley are installed before the flywheel nut is installed.
Any ideas?
Thanks
GEL
Reply With Quote
  #2  
Old 05-27-2011, 06:54 AM
steveyrock's Avatar
steveyrock steveyrock is offline
Member
  
Join Date: Aug 2010
Location: PA
Posts: 87
Default
I use an air gun to remove the nut,no need to hold the flywheel.Try a sharp blow on your ratchet handle to break it loose with a strap wrench on the other end of the crank.
__________________
122-snow blade and 42 deck, wheel weights, fluid filled tires,chains
106-42"deck
1250-44 and 50" decks
147-44"deck
2155-42"snowblower 38"deck, chains,suitcase weights
Exmark Quest-zero turn 42"deck 23hp Kawasaki engine
Reply With Quote
  #3  
Old 05-27-2011, 08:16 AM
jmroy's Avatar
jmroy jmroy is offline
Senior Member
  
Join Date: Aug 2010
Location: Connecticut
Posts: 173
Default
I put a strap wrench on the pto basket when I did mine.
__________________
Web Developer - Need a website? Contact me.
Reply With Quote
  #4  
Old 05-27-2011, 06:59 PM
westofb's Avatar
westofb westofb is offline
Senior Member
  
Join Date: Feb 2011
Location: Missouri
Posts: 533
Default
Quote:
Originally Posted by steveyrock View Post
I use an air gun to remove the nut,no need to hold the flywheel.Try a sharp blow on your ratchet handle to break it loose with a strap wrench on the other end of the crank.
Years ago I had a 102 project, I do not recommend using an air impact on the nut that holds the flywheel on. I tried this myself on that project and got to add the cost of a new crank to the build. It sheared off the entire threaded portion of the crank, back then a new crank was $160 or so, now they exceed $400.
__________________
Jeff
Brookfield, MO
________________
IH Red 782 with weights and sleeve hitch!
IH snow blade, Brinly plow, Brinly disk, Brinly harrow, Johnson rear blade, and a #2 IH Cart
Reply With Quote
  #5  
Old 05-27-2011, 09:44 PM
hjsmith00843 hjsmith00843 is offline
Senior Member
  
Join Date: Mar 2011
Location: South Carolina
Posts: 154
Default
does it have a flywheel gear on it. If so use a pair of locking pliers on it. Use a harmonic balancer to remove it. You might have put pressure on it with the puller then tap it gently with a hammer. Should pop right off.
__________________
Operation Iraqi Freedom Vet!!!!
Reply With Quote
  #6  
Old 05-27-2011, 10:23 PM
jmroy's Avatar
jmroy jmroy is offline
Senior Member
  
Join Date: Aug 2010
Location: Connecticut
Posts: 173
Default
When I did it I practically had to stand on it. Some are easy, some aren't.
__________________
Web Developer - Need a website? Contact me.
Reply With Quote
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:17 PM.

www.onlycubcadets.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.