|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#2
06-05-2014, 02:58 PM
|
|||
|
|||
I just finished mine up yesterday. Check your steering box adjustment, the nut can loosen up and the follower can back out....it doesn't take much to loosen it up a lot. I did new tie rod ends and heim joints, and adjusted the steering box. I also did what John Hall did, bored out the steering lever (the piece mounted in the rear of the axle) and installed an oilite bushing with a hole for the grease zerk.....I also made a new pin for it since the original was worn quite a bit. The only play in my steering is the axle now, it moves a tiny tiny bit before the wheel starts to move. It used to have almost half a turn, the steering lever moved at least 3/4" up and down in the axle before any wheel movement.
|
|
#3
06-05-2014, 10:33 PM
|
||||
|
||||
|
I also did some work to my steering box. I don't know how to post a link to the thread but search under the IH forum for manual steering upgrade. In a nutshell I put in a new cam follower and seal. I also upgraded from a thrust washer to bearing. There is some machining required to the mounting bracket to do this. There are two different steering boxes on 982's, got to know which one you have. You'll also see I made a shim to improve the contact area. One other thing I did was to work on the pivot bolt for the front axle, it was wore bad on the backside. All new joints as well. Things can certainly snowball in the steering system.
|
|
#4
06-06-2014, 06:13 AM
|
||||
|
||||
|
__________________
(2) Original, 100, 102, 124, 73, 800, #1 and #2 cart, brinly plows, disk, IH184, IH244, 1948 F Cub
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
