![]() |
PLEASE PATRONIZE OUR SPONSORS!
|
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
I would like to remove the steering wheel from my Cub Cadet 105 so that I can repaint the tractor. Is there a good way to remove a steering wheel without destroying it? The curved plastic base will not allow a wheel puller to be used.
Thank you for your suggestions. |
#2
|
||||
|
||||
![]()
__________________
DWayne 1973: 128, ag tires, 3pt. lift, spring assist, lights, 42" Deck 10" moldboard plow 2016 XT1 42" deck 18HP |
#3
|
||||
|
||||
![]()
PB Blaster and patents for starters.
Here is what I used on my original, granted the spokes aren't coated.
__________________
Make the best of each day , Todd ![]() Original's Face Lift thread.http://www.onlycubcadets.net/forum/s...ad.php?t=34439 (O) Start to Finish video.https://www.youtube.com/watch?v=GAoUNNiLwKs Wheel Around videohttps://www.youtube.com/watch?v=XUL-m6Bramk They can't all be turn key! ![]() |
#4
|
||||
|
||||
![]()
Make sure you have a nut on the threads Zippy or you will split the shaft.BTDT
__________________
Up to 530 and counting... I give up updating my profile! |
#5
|
||||
|
||||
![]()
Good point Lew. But this time everything worked as planned.
__________________
Make the best of each day , Todd ![]() Original's Face Lift thread.http://www.onlycubcadets.net/forum/s...ad.php?t=34439 (O) Start to Finish video.https://www.youtube.com/watch?v=GAoUNNiLwKs Wheel Around videohttps://www.youtube.com/watch?v=XUL-m6Bramk They can't all be turn key! ![]() |
#6
|
||||
|
||||
![]()
Zippy he is refering to a 105 steering wheel removal. Using that set up will mash the tapered plastic botttom of the steering wheel. BTDT I have had better luck with a steering wheel puller connected to a clam shell puller on the bottom of the plastic. Draw it up up pretty snug and give the end of the threaded rod a good smack with a hammer. Should dislodge it.
__________________
149,682,1641,1711 with a 12hp in it 1 8" brinly plow 1 10" brinly plow 451 snow blower,H-48 International snow thrower 42" york rake with fold down grader blade. |
#7
|
||||
|
||||
![]()
You can try something like this. The wood is piece is split in 2 halves, placed under steering wheel and bolted back together. The puller bolts go through the wood, pulls on the wood, no damage to plastic.
swpuller1.jpg swpuller2.jpg swpuller3.jpg |
#8
|
|||
|
|||
![]()
I've been told the guys at the CC shop sit on the seat with their knees under the steering wheel rim and then use a pneumatic hammer to thump on the steering shaft.
Never tried it but sounds like it might work. |
#9
|
||||
|
||||
![]()
I got tired of trying different things so I got a puller set from HF and have made the jobs on my Kids real easy. Don't know if it would be worth it if you only had one wheel to mess with. Seems I am ordering tools I don't have every couple of days. I love this madness.
__________________
Original, 109, a pair of 122s, 124 with power lift, 124 with creeper, 126, 147, 1050, 1200, two 1250s, 1450 Dual Stick , another 1450, two 1650s, Gannon Earthcavator, Haban sickle bar and a bunch of other things you either pull, push or hang underneath. |
![]() |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.