|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#12
03-15-2013, 12:25 AM
|
||||
|
||||
When I mounted my Craftsman johnny bucket to my 1811 the length of the moment arm made a BIG difference in how much power the lift had. I you attach that winch to that short of a handle you will burn out the winch most likely. I'm not saying it won't work but it won't have much strength to do much except to position something with no load on it. It might make more sense to use the winch as a lift vertically attached to the rear of the tractor and let gravity do the downward movement. That way if you double sheaved it it would have a lot lift of power but no down power. I made an electrically operated dump rear bed on my old golf cart using one of the HF $49 winches and it worked great. The bed was about 55% over center so that the cable of the winch held the bed level and when I useed the hhand remote to lower it then it would go to the full dump position. One click of the button and back up it came. The trick was having the dump bed be 55%past the CG instead of 50/50 which would have made the load the deciding factor as to whether it would dump or not. of the bed otherwise it would not have dumped :beerchug
__________________
1811 Hydro "Failing to prepare is preparing to fail". 
|
|
#13
03-15-2013, 07:26 AM
|
||||
|
||||
|
Rudy
If you think about the 147 with the electric lift I doubt that the actuator had 2000 lbs. of force. Like I said this is a maybe project, not even sure I will do it at this point because I don’t have a need for a tractor with a lift. If I do I would probably set it up with a 2 or 3 part line just to slow the speed of the lift down and that would double or triple the pull from the winch.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL
|
|
#14
03-15-2013, 08:33 AM
|
|||
|
|||
|
Sam Mac,
Is that a 100 super build? I am very interested! Sorry for the hijack! Randy
__________________
2 original cub cadets  1 100's 2 149's 1 73 1 2182
|
|
#15
03-15-2013, 08:47 AM
|
|||
|
|||
|
Quote:
__________________
Cub 104 Refurbed Sprinig of 2013 Aftermarket headlights, 3 point, Brinly Adapter, Spring Assist, 42" IH Blade, 42" Mower Deck, 42" Craftsman Grader Blade, 10" Brinly Plow, 6-12 ags and 22x9.50 turfs
|
|
#16
03-15-2013, 09:23 AM
|
||||
|
||||
|
Vartz
I’m not trying to hijack this thread, sorry if that’s what you thought. I think your idea would work as you posted. Randy No it’s not a Super 100 this is the thread for the build. http://www.onlycubcadets.net/forum/s...ad.php?t=20585 Just a play toy.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
