Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)
-   -   Parts Donor (https://www.onlycubcadets.net/forum/showthread.php?t=9663)

juniors1282 03-29-2011 04:44 PM

Parts Donor
 
4 Attachment(s)
Well I found this 1806 yesterday. Went and picked it up today, It's been sitting for several years. The clutch went big time and the guy though the motor went so he parked it. The tins are in good shape just faded from sitting outside in the sun. The tractor has 502 hours on it. I had a little time so I checked compression and it has lots of compression. The clutch is completly distroyed. But I don't care about that. This one is going to be a donor for the 784 the 18 mag is going in it, I'm going to change the harness and everything into 784 so it should be an easy swap. It has a aluminum creeper, that's headed for the 582 :biggrin2:. And it has a very well built homemade spring assist on it, which will find it's way onto the 1282 someday. The tins are nice and the seat is in good shape. I should have everything I need to breath life back into the 784. :biggrin2: Going to try to get it running later after baseball practice. I'll let you guys know what I make out. Oh yea $300 bucks with a 50" deck

ACecil 03-29-2011 05:14 PM

Awesome find, Eric! :ThumbsUp:

cub cadet people II 03-29-2011 05:25 PM

Nice Tractor, Eric!

TEET 03-29-2011 05:39 PM

Very nice Eric...you and I both love our 82 series :) I could always use a couple more as well :beerchug:

Jeff (teet)

Cubcrazy 03-29-2011 06:14 PM

Nice looking 1806 Eric!!!

juniors1282 03-29-2011 07:47 PM

Thanks guys. Look at those picture's good because that's the last tme that tractor will look like that! It's already torn apart. I'm headed down to see if I can get it fired up.

jbollis 03-29-2011 08:30 PM

Nice find, That is only the 3rd 1806 I have seen. If the dash is nice I would be interested in it, if you don't have plans for it already. The one on mine is pretty bad.

Cubcrazy 03-29-2011 09:25 PM

Eric,

You get that M18 into that 784 already?!

Darrell 03-29-2011 09:50 PM

Gotta love those twin cylinders !! I would have bought it for the motor also.

BTW , the hood ornament is backards ??!!

ajgross 03-29-2011 10:42 PM

Eric, you're going at it the wrong way! What you NEED to do is put the 1806 driveline in the 582 with a stiffer clutch spring and then you'll really have something. just keep the cast rearend in it.

AJ


All times are GMT -4. The time now is 11:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.