Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   Headlight Harness (https://www.onlycubcadets.net/forum/showthread.php?t=9028)

JaysNJcub127 03-01-2011 10:40 PM

Headlight Harness
 
Can someone post a pic up of a headlight harness on a 73 / 127.

I need to make one and wanted to see an original one so I can duplicate it.

R Bedell 03-02-2011 05:58 AM

This should help you.... Diagram. Scroll down to the 1x6/7 Series.

JaysNJcub127 03-02-2011 06:04 AM

Thanks
 
Thanks I have that but looking for a picture of the actual harness so I can duplicate it to factory look. The wire that were on there were put together with wire nuts!!!! Yikes.

R Bedell 03-02-2011 08:21 AM

1 Attachment(s)
First, let me say, that I do not own a model within the 1x6/7 series of Cubs. Based upon what I have seen on other series of Cubs, I would venture an educated guess, that there is no "headlight harness". I suspect, that there is a single 14GA Yellow Wire that connects to each end of the Main Harness at the purple wire connectors, as it travels through the "tunnel" area..

I would simply get some 14MTW GA wire in Yellow and a few terminal connectors, an inline fuse holder, a light switch, and wire up as indicated in the Wiring Diagram.

Now, it is not to say, that one can not find the actual wire that IH made for their lighting kit but I would guess this maybe a tad difficult.

One could try the Sponsors above and place a Want Ad in the Classified Section to see if any can be found.

gcbailey 03-02-2011 09:19 AM

I'd go with Roland on this one.... The light harness I got for my 127 was as described by him. I've saw a few more harness pictures looking on flickr and they are all the same way.

nikster 03-02-2011 09:41 AM

Since this post is related to lights, where does one BUY the rubber type cushion for the lights? Can't seem to find them?

I took my headlights out to replace them & the rubber gasket that
I'm assuming it's to absorb vibration, & it fell apart in itty bitty pieces of garbage.

Any suggestions if those gaskets aren't available?

I would think that they are IMPORTANT?

Thanks in advance,

Nik,

JaysNJcub127 03-02-2011 09:54 AM

Picture
 
Quote:

Originally Posted by gcbailey (Post 60657)
I'd go with Roland on this one.... The light harness I got for my 127 was as described by him. I've saw a few more harness pictures looking on flickr and they are all the same way.

Picture Gary!!!! Please!!!

R Bedell 03-02-2011 12:33 PM

Nik:

I would look at your Ag or Farm Implement Stores and/or Suppliers (ie: TSC).

Sminkey 03-02-2011 01:03 PM

2 Attachment(s)
Here's a couple pics from my 147, same as 73, 127 I think. Hope this helps ya out.

gcbailey 03-02-2011 01:21 PM

3 Attachment(s)
These are the only ones on my laptop... let me know if you need other angles and I'll snap some later.


All times are GMT -4. The time now is 08:44 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.