Only Cub Cadets
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   Implements and Attachments (https://www.onlycubcadets.net/forum/forumdisplay.php?f=16)
-   -   2182 w/60" Haban (https://www.onlycubcadets.net/forum/showthread.php?t=55866)

93Tim1440 09-14-2019 09:59 PM
2182 w/60" Haban
 
Went to mount my 60" Haban deck and one of the spring-loaded pins, nos. 28, 34 and 35 on the diagram is missing. The previous owner has replaced it with a bolt and two nuts.

Would anyone have these, the pin, the spring, and the roll pin or I would accept the entire plate no. 18 if someone had it available?


https://cdn.datamanager.arinet.com/i...0ac20aa/Medium

cooperino 09-15-2019 07:39 AM
Quote:
Originally Posted by 93Tim1440 (Post 488011)
Went to mount my 60" Haband deck and one of the spring-loaded pins, nos. 28, 34 and 35 on the diagram is missing. The previous owner has replaced it with a bolt and two nuts.

Would anyone have these, the pin, the spring, and the roll pin or I would accept the entire plate no. 18 if someone had it available?



https://cdn.datamanager.arinet.com/i...0ac20aa/Medium
Is is possible that the part your looking for is part of a different sub assembly? Even obsolete parts are usually in drawing just NLA. McMaster's has a bunch of pins,springs, etc

Sam Mac 09-15-2019 09:26 AM
Try the sponsors at the top of the page. Click on the links
Patton Acres
Cub Classics
Houtz
Cub Cadet Specialties

Last resort take the good one to a machine shop and have one made.

93Tim1440 09-15-2019 11:43 AM
Quote:
Originally Posted by cooperino (Post 488013)
Is is possible that the part your looking for is part of a different sub assembly? Even obsolete parts are usually in drawing just NLA. McMaster's has a bunch of pins, springs, etc
No, those three parts have their own separate part numbers.

HA-20308 (Pin)
HA-5681 (Spring)
HA-GM9416147 (Roll Pin)

93Tim1440 09-15-2019 11:47 AM
Quote:
Originally Posted by Sam Mac (Post 488017)
Try the sponsors at the top of the page. Click on the links
Patton Acres
Cub Classics
Houtz
Cub Cadet Specialties


Last resort take the good one to a machine shop and have one made.
Thanks, Sam.

I'll start the search tomorrow.


Whoever moved my post for more exposure, thank you also. It never occured to me to start a new thread.

cooperino 09-15-2019 12:47 PM
Quote:
Originally Posted by 93Tim1440 (Post 488024)
No, those three parts have their own separate part numbers.

HA-20308 (Pin)
HA-5681 (Spring)
HA-GM9416147 (Roll Pin)
Ok. I misunderstood. I thought you were looking for part numbers

R Bedell 09-15-2019 01:10 PM
Quote:
Whoever moved my post for more exposure, thank you also. It never occured to me to start a new thread.
You are welcome.:beerchug:

Sam Mac 09-15-2019 01:13 PM
2 Attachment(s)
Just a FYI, the early Haban decks just used a 3/4" round bar stock with a hair pin clip on each end. The bar went all the way across the hitch.

93Tim1440 09-15-2019 02:52 PM
Quote:
Originally Posted by Sam Mac (Post 488028)
Just a FYI, the early Haban decks just used a 3/4" round bar stock with a hair pin clip on each end. The bar went all the way across the hitch.
Pics of my deck.

https://scontent-iad3-1.xx.fbcdn.net...ec&oe=5DF875A1


https://scontent-iad3-1.xx.fbcdn.net...49&oe=5DF0A98C

https://scontent-iad3-1.xx.fbcdn.net...d3&oe=5E0C6958

Sam Mac 09-15-2019 03:27 PM
2 Attachment(s)
Take the existing factory pin and the bolt out, and replace them with a solid rod with a couple holes drilled in it for a couple hair pins.


All times are GMT -4. The time now is 02:22 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.