Head bolts
 

What head bolts should I use on the 1250? The old head bolts are warped and I really don't want to reuse them. Also, it lists two different bolt lengths, 1 1/2, and 1 3/4 in, which one is right? What grade should I use?

Attachment 97786
7 @ 1.5"
1 @1.75"
1, 3.5" stud
1 spacer
2 nuts
11 heavy duty washers
All grade 8

How long is the spacer? Mine was snapped in half (no idea how you'd do that).

The stud goes in the #4 position and the long bolt goes in the #9 position.

The spacer goes on the stud for the lift bracket. As I recall you don't have a lift bracket. Right? :bigthink:

Duh! It's as long as the one that you have snapped in half after you put the two pieces together.

Oh, I managed to find a lift bracket on the floor off my brother's 1450. Lucky me, I guess.

Tried that. Both parts when absolutely flying when it snapped off the stud and will be impossible to find.

Ok. Good. I can't measure it now. You can see it in the second picture, it's like 3/4" to 7/8" long. You can make it out of a piece of pipe.

You should update your fastener list.

Impossible to find...…
No surprise there!!

Oh, I managed to find a lift bracket on the floor off my brother's 1450

A or the???? Pure chaos....