Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   KOHLER KT17 Rebuilding Questions (https://www.onlycubcadets.net/forum/showthread.php?t=537)

wig 04-25-2009 10:26 PM

KOHLER KT17 Rebuilding Questions
 
I need to re-ring my motor. First are the after market connecting rods and rings worth using?Next, the pistons are std. size, but not sure which size connecting rods to use.How do I know which connecting rods to use?

wig 04-26-2009 01:04 PM

measuring the crank
 
will I have to pull the crank, just to mic it?

Matt G. 04-26-2009 01:14 PM

Personally, I can't afford OEM connecting rods for these things...when I put my M18 project back together, it's getting aftermarket rods and rings. Connecting rods for these things only come in standard and .010 undersize. The undersize rods have a small hole drilled in the web. I'd also replace the governor gear and mains while you're in there.


All times are GMT -4. The time now is 05:05 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.