Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   General Talk (https://www.onlycubcadets.net/forum/forumdisplay.php?f=24)
-   -   Longest running project mower (https://www.onlycubcadets.net/forum/showthread.php?t=53248)

john hall 09-01-2018 02:37 PM

Longest running project mower
 
2 Attachment(s)
So what's your longest running project in regards to fixing up a Cadet? I don't mean something simple like needing to put a tube in a tire because you had to add air twice all season, I'm talking that essentially dead machine that needs so much work you can't use it. Fencerow finds you dumped in the yard do not count, you have to have started working on it and have spent some $$$$ for parts.
Mine is a 2284 that has resided here for almost 2 full seasons. I did mow a little last year but had to quit due to a blown out muffler and BAD deck bearings--That sucker was louder than jumbo jet taking off. I finally got the muffler on and the deck is in a million pcs---pretty close anyway. I think now there are only 6 bolts left in the deck--gonna need the hot wrench for them.

olds45512 09-01-2018 03:04 PM

3 Attachment(s)
Mine has to be the Viking, I got it last year after it had been left for dead and left to sit for several years. I'm currently using it to mow with just to work out any issues that might pop up and plan to pull it apart for paint come winter, I hope to have it all done for red power roundup next year since it will be in PA. Here's two pics of how it looked when I brought it home and one of how it looks now.

mortten 09-01-2018 03:25 PM

My Dads 122 has been waiting for 25 years in the shed.

olds45512 09-01-2018 03:37 PM

Quote:

Originally Posted by mortten (Post 465229)
My Dads 122 has been waiting for 25 years in the shed.

Whats the hold up?

DeltaCub 09-01-2018 03:46 PM

Quote:

Originally Posted by olds45512 (Post 465231)
Whats the hold up?

Maybe it's the humidity....:biggrin2:

olds45512 09-01-2018 04:04 PM

Quote:

Originally Posted by DeltaCub (Post 465232)
Maybe it's the humidity....:biggrin2:

25yrs is a long time to delay a project due to humidity.

CADplans 09-01-2018 04:18 PM

Quote:

Originally Posted by olds45512 (Post 465231)
Whats the hold up?

He is waiting for it to morph into a wideframe,, :bigeyes: so it can be used with the snow blade that is setting next to it,,, :bigthink:









:biggrin2:

J-Mech 09-01-2018 04:53 PM

Been working on a 317 Deere for nearly a year now. It currently runs. Matter of fact I was just using it.... but you have to add oil before you run the gas tank dry. :biggrin2:

mortten 09-01-2018 09:08 PM

Quote:

Originally Posted by olds45512 (Post 465231)
Whats the hold up?

When the engine blew we were poor. That changed but we built a house, kids, etc. Now retired and I did find a replacement motor and put it in with a new clutch and driveshaft. Drove it around a few times last year and then back in the shed. Got another engine that will get rebuilt. Deciding whether to restore or keep the patina.

J-Mech 09-01-2018 09:23 PM

Quote:

Originally Posted by mortten (Post 465264)
When the engine blew we were poor. That changed but we built a house, kids, etc. Now retired and I did find a replacement motor and put it in with a new clutch and driveshaft. Drove it around a few times last year and then back in the shed. Got another engine that will get rebuilt. Deciding whether to restore or keep the patina.

You built a house, raised kids and retired within 25 years? :bigthink:

I'm close to 40 and my dad is still working..... it will take me longer than 25 years to raise all mine, lol


All times are GMT -4. The time now is 05:52 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.