782 king pin bushings & bolts source?
 

Does anyone know where I can find king pin bushings & bolts for a 782

I think the part #'s are

750-3002 for the bushing

710-3020 for the bolt

Thanks,

Daryl

You can find parts at:
* Your local Cub Cadet Dealer
* Your local Case/IH Dealer
* The Sponsors list at the top of this page (Patton or Houtz)
* And numerous sources all over the Internet

Thanks,

They aren't available at the dealers anymore

Many models of Tractors used those parts. I would look at Patton or Houtz above, for some good used parts.

Those parts were used on these models:
* all of the 1x8/9 Series
* all of the Quietline Series
* all of the 82 Series
* 1204, 1210, 1211
* 1604, 1606
* 782D, 882, 1512 Diesels
* 580, 680
* 17xx Series
* 18xx Series

This guy has what you want.... http://ccspecialties.org/steering_seats.html

Scroll down until you find the part numbers.

You can also buy a kit....712-3012.......>>> 912-3012

Thank all of you very much that was the info I needed.

I had been searching the Internet without success trying to find these parts.

It's a fine thread bolt, with a hole drilled in the end for a castle nut. Just buy a bolt and drill a hole.

Make a bushing.

That's about as easy as it gets. You can order a bolt from: McMaster Carr, or Fastenall.... or anywhere you want on line. You can also order bushing material from McMaster. Or you can have a machine shop make one.

Roland, that's just the nut, not a kit.

The kit is $28 from cc specialties.

Here is a picture of the Kit I was referring to....