Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   Mower Decks (https://www.onlycubcadets.net/forum/showthread.php?t=45413)

ambrola 08-12-2016 04:21 PM

Mower Decks
 
Is there somewhere you can get the numbers to the decks on the older Cubs? I found this one in town next to me. Will it fit my 124?
http://i458.photobucket.com/albums/q...ps0eleqq89.jpg

ambrola 08-12-2016 04:22 PM

http://i458.photobucket.com/albums/q...pswljubzvs.jpg

sir_lancealot 08-12-2016 04:58 PM

Can you post an underneath side photo? I think it's the first series of the 48" 3-spindle deck. To find it on CC website, go to the Attachments section for your 124 and select 48" 3 spindle deck. Should be part 1 (1963-1968). Yes, it will work on your 124 as long as you have the correct subframe. That deck is setup for the pin-on style, not the quick attach style that would have originally come on your 124.

DeltaCub 08-12-2016 10:46 PM

It looks homemade. The deck shell looks fabricated.

Oak 08-13-2016 09:05 AM

Ronnie, he is a member on here.(Dave1953) I've purchased some nice stuff from him and he is a great guy. Give him a call, he won't do you wrong.

ambrola 08-13-2016 09:30 AM

Thanks Oak,
I see it's missing the guards? And I still haven't found the thread that puts the decks with the tractors?

Sam Mac 08-13-2016 10:07 AM

Belt tensioner looks funky. :bigthink:

DoubleO7 08-13-2016 11:26 AM

Quote:

Originally Posted by DeltaCub (Post 387020)
It looks homemade. The deck shell looks fabricated.

I agree.
The corners are sharper than factory and although hard to see, likely all welded corners versus bent corners.

budscub 08-13-2016 01:11 PM

Quote:

Originally Posted by DoubleO7 (Post 387072)
I agree.
The corners are sharper than factory and although hard to see, likely all welded corners versus bent corners.

Yes I m thinking the same thing, if you look along the front where the deck gets deeper, along those rust lines looks like maybe the upwards offset was made using a piece of angle iron. Where the rust lines lay seem to be a seam.


All times are GMT -4. The time now is 04:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.