Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   1971 10hp and blade (https://www.onlycubcadets.net/forum/showthread.php?t=38658)

64fleetside 05-01-2015 03:41 PM

1971 10hp and blade
 
Going after work to look at a "1971 10hp" GD Cadet and a "nearly new" CC front snowplow/blade. '71 was the NF-WF transition year, correct? Wish me luck, seems hard to find anything CC around here, and I have missed the few things that were around. Really want the blade but he says he will make me a deal on both. What is it with these things? My spouse is gonna kill me if I bring home another one....

R Bedell 05-01-2015 04:14 PM

It's called Yellow Fever....:biggrin2:

Yosemite Sam 05-01-2015 05:37 PM

You have to make up rules and then follow them.

Some of my rules are,

No more 7 hp Cubs, unless they are a 73.

No more 10 hp Cubs unless they are a 100.

No more Hydro Cubs unless they are a 169 or unless they are equipped with cool options.

No more Gear Drive Cubs unless they are equipped with cool options or unless they are another 128 that I am looking for (might settle for a 108).

Since I'm not really into anything newer than the 1X8/9 series none of the others are really a problem for me.

Then again, I would like to have a Diesel and a Super...

OldSkull 05-01-2015 06:00 PM

Blade, blade! My kingdom for a blade! :beerchug:

No luck yet but I bought a new shovel for my girlfriend :biggrin2:

64fleetside 05-01-2015 07:23 PM

Turned out to be a 104 with a rear lift, the fiberglass seat is nice, the IH blade looks like new. He wants $200 for both, going back Sunday to get them. Pics late Sunday.

darkminion_17 05-01-2015 07:47 PM

better go tonite and get em before there gone....

64fleetside 05-01-2015 10:04 PM

When I was leaving he expressed interest in some NOS 63-66 Chevy truck bumper guards I own....this 104 has a deck, guess its a 42 has the 1 long blade 2 short. He doesn't know if the blade fits NF or WF, as he has a 1650 and he bought it all together. Blade looks to never been used, but has some rust from lying out. Tractor won't start, he had a test light on it-had juice steady on both sides cranking so points not working.
Dang129 sheared the drive pin on the engine side, must be mad at me.

64fleetside 05-03-2015 07:25 PM

1 Attachment(s)
He cleaned the points still no start. Loaded it up, got home, put in a new H10 plug fired right up and ran, needs carb bushing and gov adjusted. PTO pulley is loose.
Battery is up, as are all tires, dry rotted, original tires on it. Engine rebuilt last year, he sez.

cadzag72 05-03-2015 07:29 PM

Sounds like you did well! Find out what the blade fits yet?

64fleetside 05-03-2015 07:49 PM

1 Attachment(s)
No clue, here it is


All times are GMT -4. The time now is 09:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.