Only Cub Cadets - What Deck is this?

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)

- Implements and Attachments (https://www.onlycubcadets.net/forum/forumdisplay.php?f=16)

- - What Deck is this? (https://www.onlycubcadets.net/forum/showthread.php?t=34669)

Steve149

09-15-2014 10:31 AM

What Deck is this?

The ID tag isn't on the deck anymore and I was just curious to find out what the model of it is!

http://i1369.photobucket.com/albums/...ps637b0144.jpg

there are a couple places that need new metal due to rust thru and bad weld jobs in the past from PO.

jimbob200521

09-15-2014 10:40 AM

How wide is it, blade tip to blade tip? That'll tell you what it is. AFAIK, those were only made for 1/2 PTO's, so there shouldn't be a lot of confusion in that respect. :beerchug:

Steve149

09-15-2014 10:57 AM

Quote:

Originally Posted by jimbob200521 (Post 286736)

How wide is it, blade tip to blade tip? That'll tell you what it is. AFAIK, those were only made for 1/2 PTO's, so there shouldn't be a lot of confusion in that respect. :beerchug:

it is about 48" there abouts tip to tip

DoubleO7

09-15-2014 11:05 AM

NF 48" deck.
48" deck has welded on wheel brackets.
42" deck has bolted on wheel brackets in same spot as 48" deck.
38" deck has bolted on wheel brackets inside rear tires of tractor.

Steve149

09-15-2014 11:09 AM

Quote:

Originally Posted by DoubleO7 (Post 286745)

NF 48" deck.
48" deck has welded on wheel brackets.
42" deck has bolted on wheel brackets in same spot as 48" deck.
38" deck has bolted on wheel brackets inside rear tires of tractor.

Is there a model # associated with this.

darkminion_17

09-15-2014 01:11 PM

48u1111
48u1112
48u1113
48u1114
48u1115

Yours looks like a 3

Steve149

09-15-2014 01:23 PM

Quote:

Originally Posted by darkminion_17 (Post 286772)

48u1111
48u1112
48u1113
48u1114
48u1115

Yours looks like a 3

Thanks I was just curious

drglinski

09-15-2014 02:47 PM

Those are the best mower decks IH made IMO.

Steve149

09-15-2014 03:46 PM

Quote:

Originally Posted by drglinski (Post 286803)

Those are the best mower decks IH made IMO.

I will tend to agree in part as to how freekin heavy it is to hoss around! There are a couple of bad spots which I am going to cut out and weld new in. Plus I have been following Adam's deck restore thread and going to do the new gauge wheels as well.

All times are GMT -4. The time now is 12:04 AM.