169 muffler dimensions?
 

I was wondering if anyone had dimensions on a 169 muffler. I have a lead on a guy that makes mufflers and he needs the dimensions for one and the fact that my 169 has the 10-14 hp muffler one it doesn't help. I do have the heat sheidl that holds the muffler and I know it lays level with it. I just thought I'd post this to see if any of you guys had any kind of dimensions to make one out of.

Picture help a lot.

here are a few pics of a 169 muffler it is 12 3/4 in long and 4 1/2 round hope this helps

Thank you very much I had lost hope. :beerchug: I give you all the internet cookies!

Connor,

Something really important to note if your having one made, is the outlet. It is clocked in an odd position.

If you look, I set it as it would be in the tractor. The outlet is in about the 7:30 position. I had looked at Nelson mufflers, and that was the issue I ran into. That, and only that position will let the exhaust out without hitting the hood, or the front grille casting. All of the Nelson mufflers had it in different positions.

Attachment 51517

Thank you Jonathan, I will let him know! :beerchug:
I know I wouldn't get an answer from pretty much ANY other website. Thank you guys

Hi! I'm new here and was happy to find this thread. I'm just starting to work on a 169 and was wondering if your guy ever made a muffler for a 169 after getting the dimensions? If so, would he make another and what would the price be? By the way, are you close to the Twin Cities? I'm in one of the NE suburbs.

I live in the NE suburbs too. Blaine, MN ring a bell?

You're really close--I'm in Circle Pines!

Check ihcubcadetwarehouse. He has 169 mufflers. I think he got Nelson to make them again. Good price on it too....

Thanks, I had seen that they have one but that's a quite a bit more than I was hoping to spend.