106 won't start....sort of.
 

I'm sure the answer is here on the forum somewhere....

I stopped mowing the other day and gassed up the 106...and it wouldn't start. Battery is good and the tractor will start and run if I jump from the + terminal to the A on the starter/generator. I guess my question is how to figure out which switch is the bad switch (Ignition key switch, Magnetic or Neutral safety switch).

Any help is appreciated!!

Thanks

It could be the solenoid too.

Hope this helps. It is the sequential order of the Start Circuit and wire color correct...

http://i176.photobucket.com/albums/w...d.png~original

Thanks for the input....I'll give an update soon.

The 106 is up and running...new blades and belts also. The issue was with some old cracked wires so I'm thinking a new wiring harness this winter.:beerchug:

Glad to hear your 106 is running! :beerchug:

Sounds like your 106 is a bit of a Rowdy Rebel also. Glad you got it going again.

Good to hear!:beerchug:

Sorry I haven't le[t up here....took on a window replacement project on the old house (20+) and having the Cub back to form was expected !! This thing would be "trail rated" by Jeep I'm sure as I have not been stuck in the wood yet. They just don't make them like this anymore !!