![]() |
belly lift lock issue
front of the mule drive bracket never looked to be all the way back to the bolts sticking out of the frame, but it seemed locked up front and the mower worked.I followed the manual and removed the deck. as soon as the rear pins were pulled, the front mule drive bracket plopped off. After puling the deck out, i lifted it up, ans tried to lock it in (pushing down on the locking bar). It would shut, then pop open again...here are pics
http://i154.photobucket.com/albums/s...ps0f84e5bb.jpg red shows where it locks on, pops open green just shows where the frame bolts on where the mule bracket slides over. to me it seems like it wont go back enough, but was working? here is a side shot so you can see if its all good in the rear http://i154.photobucket.com/albums/s...psd3db6e25.jpg thanks for helpin a newb :bash: |
1 Attachment(s)
The sides of the mule drive slide into the Frankenstein bolts on either side of the tractor, your mule drive is hung by the arrows in yellow. If it keeps falling off the springs are broken on the QA latch
|
it seems as if it wont slide back enough...
|
Got to get mad at it, works for me.
|
To lock the mule in place the bar sould be in the up position.
|
Yeah and if that doesn't help with the bar in the up position bolt it on. Mine is bolted on for added re assurance; I also bolt on my winter blade even though I don't have to; I'm not changing them every 5 seconds.
|
All times are GMT -4. The time now is 07:09 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.