Proper rear rim offset
 

for a 104 - anyone know the proper rear wheel rim offset ?

Now that the tractor is stripped down to bare bones, I noticed the two rear rims have different offsets - otherwise the same size - but definitely different offsets.

Thanks in advance.

Chuck

rear wheel offset
 

save old iron ,
I have a 104 also, it has 23x8.50-12 tires. I think this size was an option on the 104. The rim is 12-7JA, part #387 840 R91. On the inside it is 2 1/8 " from wheel flange to rim. On the outside it is 5 1/2" from flange to rim.Those measurements are as close as I could get. This was the standard wheel on the 124, optional on the 104. Hope this helps. If you have the narrow wheels, hopefully someone will chime in.

Chris

Chris, thanks for the detailed info.

The one rim appears to be the 2 1/8" offset. The second rim has only a 1 1/2" offset from rim to flange. There appears to be plenty of clearance to the fender wells with either rim, so a replacement for either one should not be hard to come by.

Thanks again

Chuck