need help with 122
 

hi guys iam stumped when i rev the throittle the ovenor is not working as is it is supose too i have changed the spring and the placement of the spring

thanks thad

help with 122
 

when you said ,you changed the placement ,i don,t get that ,the spring will only go one way ,that will work

where the end that mounts in the governor arm moved it to a more sensitive hole

Here's where the governor spring is set on my 122

http://img.photobucket.com/albums/v7...h_DCP_5169.jpg
click for bigger pic

Might works perfectly in this position.

Governors seem to be a theme lately. If you can't get it lined out, you will probably have to pull the motor and look at replacing the governor components.

Just be sure you have it calibrated it properly CCW not CW. :biggrin2: