Only Cub Cadets
Page 4 of 5 123 4 5
Show 40 post(s) from this thread on one page

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   125 , Things Im Working On (Fixing) (https://www.onlycubcadets.net/forum/showthread.php?t=17095)

4SPEED 04-11-2012 09:59 PM
Quote:
Originally Posted by CADplans (Post 126408)
Your progress looks great!!

I see the bolt is now in place holding the front axle.

I hate to back you us a step, but, I have seen others just tighten that bolt to take out the slop of the frame to axle fit.

Without the shim, the axle/frame joint will be slightly stronger.
I made sure the shim was the same size as the area on the axle.

4SPEED 04-11-2012 10:04 PM
Quote:
Originally Posted by jbrewer (Post 126405)
How did you fixture your axle to make sure you drilled the oversize hole exactly parallel to the original bore?

John
I jiged it up in a mill , its a old one from the 50's and the guy just uses it for a drill press. its still tight enough to do what I needed.

Matt G. 04-11-2012 10:20 PM
The (earlier) K301 and K241 flywheel shrouds are interchangeable. I think the later K301 engines, i.e. QLs, may have had the larger flywheel, but I can't remember.

4SPEED 04-11-2012 10:23 PM
1 Attachment(s)
Quote:
Originally Posted by darkminion_17 (Post 126413)
Looks like a nice job on the 3 point.Your motor has a flat oil pan so it is a K241
I guess I'll be looking for a k301 or bigger next. what engine is in a 129 ? I know of one close by. the 149 behind it is spent.

4SPEED 04-11-2012 10:30 PM
2 Attachment(s)
last pic for now. still need the spindle for the deck to show up in the mail.

darkminion_17 04-11-2012 10:37 PM
The 129 has a k 301 in it.

4SPEED 04-11-2012 10:46 PM
cool , thanks. I'll go over there and look at it tomorrow (check the pan first) then see if it'll fire.

any one need a really good running K241

ACecil 04-12-2012 11:18 AM
Doug, your 125 is looking good!

4SPEED 04-12-2012 05:04 PM
4 Attachment(s)
hay,, the spindle showed up today... I got the deck on and the 682 did some tilling around a tree.

time to get back to work on the 582. I miss the O'l girl.

ACecil 04-12-2012 10:31 PM
Thanks for the great pics!


All times are GMT -4. The time now is 09:53 AM.
Page 4 of 5 123 4 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.