![]() |
|
#1
|
||||
|
||||
|
Here's a list of some stuff I found from NAPA. I think there may be more things. Hope you find this useful.
Cross Reference Cub Cadet to NAPA Tie rod end CCC # 723-3018 NAPA # 7-04231 3/4" wheel bearing IH # 394883R93, NAPA # 7-04292 1" wheel bearing CCC # 741-3002, NAPA # 7-08412 Electronic Voltage Regulator plug NAPA # 7-016008 5 prong ignition switch plug NAPA # 7-016034 Breaker points Kohler # 47-150-03, NAPA # 7-01029 Condenser IH # 62188C1, Kohler # 230722-S, NAPA # 7-01338 Muffler, models 102-149 IH # 393840R91, NAPA # 7-03680 Hydro filter CCC # 723-3014, NAPA # 1084 Hydro filter for auto gear pump CCC # 723-3014, NAPA # 1410 Rear wheel seal CCC # 721-0187, NAPA # 9878 Hydro input seal IH # 394847R91, Sundstrand # 9008000-6201 NAPA # 6204 Hydro trunion seal SN 592014 & below IH # 383534R91 NAPA # 6720 Hydro trunion seal SN 592015 & above Sundstrand # 9008000-6701 NAPA # 6763 PTO bearing, models 70-169 IH # 60071C91 NAPA # RA100RR and PRA100RR (cheaper version) Engine oil filter Kohler 52-050-02-S, NAPA # 1348 Engine oil filter Kohler 12-050-01-S, NAPA # 1056 Shaft seal for Narrow Frame Hydraulic lift pump IH # 347478R91, NAPA # 4911 Sway bar repair kit to replace Quiet Line ISO mount rubbers NAPA # 265-1285 Spark Plug Cross Reference Chart Engine – Kohler K241 (10 HP), K301 (12 HP), K321 (14 HP), K341 (16 HP) Manufacturer and Number ------- Mfgr. Stock Number Champion H10C --------------------- 844 Denso W14L --------- -------------- 6013 NGK B4L ---------------------------- 3112 14mm, 7/16 reach, 13/16 hex. These plugs recommended for stock engines. Engine* – Kohler K241 (10 HP), K301 (12 HP), K321 (14 HP), K341 (16 HP) Champion H8C ------------------------ 587 14mm, 7/16 reach, 13/16 hex. *These are colder heat range plugs for use in modified engines with higher than stock compression ratios. Engine – Kohler K141 (6.25 HP), K161 (7 HP), K181 (8 HP) Champion J8C ------------------------- 841 14mm, 3/8 reach, 13/16 hex. Engine – Kohler KT17 Opposed Twin Champion RV17YC --------------------- 25 14mm, .460 reach, 5/8 hex. Engine – Onan 20 HP Opposed Twin Champion RC14YC --------------------- 431 14mm, 3/4 reach, 5/8 hex.
__________________
Patience is the key to success . The difficult, I'll do today . The impossible, I'll do tomorrow
|
|
#2
|
||||
|
||||
|
Cyclops wheel seal CCC # 921-3020A National # 474256 SKF # 11930
Source: Oaks thread. http://onlycubcadets.net/forum/showthread.php?t=35077
__________________
Travis 1993 Cub Cadet 2064 1988 Cub Cadet 2072 1980 IH Cub Cadet 782 w/CH20 1966 IH Cub Cadet 102 w/K301 1961 IH Cub Cadet O 1967 IH Cub Cadet 102 & 122 JD 2155 w/ 175 loader |
![]() |
|
|