Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Speciaalties R. F. Houtz and Sons

Patton Acres IH Cub Cadet Parts

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Go Back   Only Cub Cadets > Cub Cadets > Cub Cadet Engines > Kohler Engines

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 09-22-2022, 04:04 AM
SuzukiT350man SuzukiT350man is offline
Member
 
Join Date: Oct 2021
Location: Alabama
Posts: 44
Default Kohler K341 (16 hp) mods?

I’m going to be rebuilding a 16 hp kohler and I want to have a little more get-up-and-go power but not excessive. I’ve heard also that these flathead kohlers won’t tolerate any RPM above 3600, but it’s doable with the right configuration. I plan on (so far) boring it 0.20” over, shave the head 0.0040”, and use ISaveTractors rebuild kit. I’d like it to run a tad over 4000 RPM so the mower deck blades will spin a little faster as well, but not compromise engine reliability and wear. I’ve seen tractor pullers run a modified kohler k series many years in a row capable of 6-7k rpm so I know it isn’t impossible.

Like i said i don’t want to go overboard on modifying it, and nor do I want to send a connecting rod to the mesosphere. I would probably start out with some heavier valve springs and a thinner head gasket for a tad more compression along with the shaved head, a modern magneto kit for shorter ignition delay, and most likely re-jet the carb. The carb came off a K321 but the parts catalog says they have the same size carb but different jet sizes.

So anyone out there that has built a K-Series and knows a couple tricks let me know. I’ve built modern honda and briggs engines but never anything close to this before. It came off of a 169 and I plan on repainting most of the body and frame that’s in bad shape while I have the engine off. Thanks for reading my late night project planning, i’m looking forward to giving progress updates
Reply With Quote
  #2  
Old 09-22-2022, 06:19 PM
RustyShackleford's Avatar
RustyShackleford RustyShackleford is offline
Senior Member
 
Join Date: Dec 2020
Location: CA
Posts: 121
Default

Check out Midwest Super Cub.
__________________
102
Reply With Quote
  #3  
Old 09-22-2022, 08:24 PM
Merk Merk is offline
Grand Member
 
Join Date: Mar 2009
Location: Ohio
Posts: 2,163
Default

Is the K341 the original engine to the tractor?
If it is the original engine I would do a stock rebuild. IH Cub Cadet 169's are the 2nd lowest production Cub Cadet made. Only a little over 4000 units were made.

If it was my tractor and I had the hot rod inkling I would find another K341.

I would keep RPM's below 4000 rpm the cast iron flywheel and crank were not design to run over 4000 rpm. Nasty things can happen when they fly apart over 4000 rpm.

Here is a site that can help you out: http://www.kirkengines.com/
__________________
Project Uncle Dick
Cub Cadet 70
http://www.onlycubcadets.net/forum/s...ght=Uncle+Dick
Reply With Quote
  #4  
Old 09-24-2022, 12:34 PM
SuzukiT350man SuzukiT350man is offline
Member
 
Join Date: Oct 2021
Location: Alabama
Posts: 44
Default

I know all about K-Series engines above 4000 rpm, I’ve seen a few stock cubs blow up at tractor pulls. I know they made 4,005 cub cadet 169’s, and mine has a million hours on it unfortunately. If it wasn’t in bad condition I would restore it to look like it just left the factory and rarely use it. I know I’d be frowned upon for hot rodding it and I may keep it the way it is. I can’t find any 16 or 18 horse kohlers close by but I’ll find one eventually
Reply With Quote
  #5  
Old 09-25-2022, 08:35 AM
Oak's Avatar
Oak Oak is offline
Grand Member
 
Join Date: Jun 2009
Location: Georgia
Posts: 4,733
Default

Post some pics of your 169 if you can. What is the serial number? 13 fin blocks are highly sought after. You will still be mowing with 50 year old technology so I'm thinking spinning the blades a little faster ain't gonna help ya much.

U in Bama, me in GA?????
__________________
This ain't no hobby....it's an addiction
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:26 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.