|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#2
11-11-2023, 12:28 PM
|
||||
|
||||
I don’t think anybody has built one yet. There are 2 different versions for the 3k machines. The 207 & 365 depending if your machine has the CI rear or not.
__________________
This ain't no hobby....it's an addiction 
|
|
#5
11-12-2023, 09:14 AM
|
|||
|
|||
|
Walter,
Post a good clear picture of what you do have so far. Lay it out on a nice surface free of clutter so we can see just what you have.' Also include a good clear picture of the rear of the Cub, mainly the rear plate between the wheels. The rock shaft is a welded assembly
|
|
#6
11-12-2023, 05:47 PM
|
|||
|
|||
|
Just build one and make it better use real bearing blocks on the back plate. You can cut the back plate for the hydraulic cylinder or mount everything outside the back plate and possibly use two cylinders. The amount of movement of the stock 3 point is minimal and you can do a lot better with your own build.
Bill
|
|
#7
11-12-2023, 06:00 PM
|
||||
|
||||
3 point hitch.
My big problem is I don't have any measurements to go by. I know on the back plate there are 2 holes on each side to mount the rock shaft brackets on. On the lower right there is the cutout for the lift cylinder to stick out and hook to rock shaft. I have the 2 link assembles already. Also rest of hookups, except the rockshaft.
__________________
Walter
|
|
#8
11-12-2023, 06:12 PM
|
|||
|
|||
|
Walter, I actually have a 3000 with a 3 point on it - it's my next project. It is sort of buried right now but if I move it out to rearrange things for the winter I will take some pictures and try to get the measurements you need.
Bill
|
|
#9
11-12-2023, 07:55 PM
|
||||
|
||||
|
3 point hitch.
Thanks Bill I would appreciate that. My coupling to tie the 2 valve assembles together will be here tomorrow along with the hydraulic lift cylinder. Still have to finish rebuilding the 2 valve assembles an shorten the handle for hydraulic valve. I ended up with 2 handles the same length. And have to drill out 1 more brass bushing that goes on lift link.
__________________
Walter
|
|
#10
11-13-2023, 07:18 AM
|
||||
|
||||
|
Quote:
All I am missing for a 190-365-100 Hydraulic hoses and cylinder. The cylinder I can get from a supplier. finsruskw made me a new rear hitch Plate and some rocker-shaft Mounting brackets. The 190-365-100 Only works with aluminum transmission case tractors with external Brake controls This boneyard https://www.ihccw.com/ might still have a rocker shaft for a 190-207-100. I am finally purchasing a 3208 to mount the 190-207-100. I'll just have 3 leavers, though I won't have the 4 leavers. But thanks to this https://summit-hydraulics.com/produc...button-switch/ I'll have 4 outlets and will only need one lever. I'm also getting a 54-inch Blade with the manual angle kit, so the next search will be for the angle kit and horses for that to use in the Summit multiplier 
__________________
0riginal, 60 RER, 70, 106, 1450, 2182, 3208, XT3GSX & SX54 Z Force
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
