PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
149?
Have an opportunity to purchase this. Its a 149. Told it has run recently but carb floods. Im not worried about that. From a user point of view wanted to see who likes them and why and who dislikes them and why. Also I am looking for a machine to do a nut and bolt resto on and not sure which models really deserve that kind of attention. I'm guessing an O would be more deserving than a 149 but what units are more desirable of the 100 and up series?.
Thanks for the help.
__________________
Cooperino 100, 104,125, 126, 2x129's, 804, 1211, 1641 |
#2
|
||||
|
||||
other candidate
Here is my other candidate for to buy and resto,
147. yeah its cleaner by far. more money also.. which one would you guys resto? ignoring the condition...
__________________
Cooperino 100, 104,125, 126, 2x129's, 804, 1211, 1641 |
#3
|
||||
|
||||
If I had to choose it would be the 149 due to the hydraulic lift, the wide frame's are also easier to work on and better built in my opinion. I don't really care for any of the older hydro tractors because I'm left handed and steer with my left hand and find it very uncomfortable to steer with my right hand and run the hydro with my left, it makes me feel like I'm not really in control.
__________________
Tim Pap's 100 Restored 108 1211 Dual Stick 1050 Pap's 100 restoration thread - http://onlycubcadets.net/forum/showthread.php?t=47965 |
#4
|
||||
|
||||
Both are nice in their own way. Does the 149 come with anything? Deck? The 149 has hydraulic lift so that’s a big plus. 147 is cool being the only nf with the 14 in it with the special frame knotch. Here’s what some including me will say....................get both
__________________
(2) Original, 100, 102, 124, 73, 800, #1 and #2 cart, brinly plows, disk, IH184, IH244, 1948 F Cub |
#5
|
||||
|
||||
Quote:
The 149 has the go go handle on the same side as a NF. I would go with the 147, the other is missing parts. On another note my Uncle Frank used to steer with his large belly to keep his hands free to eat and drive at the same time.
__________________
Up to 530 and counting... I give up updating my profile! |
#6
|
||||
|
||||
Fully aware of where the handle is on a 149, he asked which one to buy between the two so I answered. If I'm going to be uncomfortable on a tractor it's at least going to have hydraulic lift.
__________________
Tim Pap's 100 Restored 108 1211 Dual Stick 1050 Pap's 100 restoration thread - http://onlycubcadets.net/forum/showthread.php?t=47965 |
#7
|
||||
|
||||
I have both a 147 and a 149. I am in the process of restoring the 149. They are pretty similar. The 147 is supposed to have an electric deck lift, but that one was converted to Manual, and the 149 has a hydraulic lift. The hydraulic lift would definitely be nicer for any work which requires you to lift the implement often, but just for mowing, it probably won't be much of a difference. The 149s are also easier to work on with the removable tunnel cover.
If it were me, I would choose the 147, but I am partial to that series. You already have a 126, so if you want more variety, the 149 looks a little different. This would be a tough decision for me, since they are my 2 favorite models.
__________________
125, 126, 147, 129, 149 x 2, 1450, 882, 1810, 1320, 1440, 2135, 2 129’s for parts/project, 1950 Farmall Cub 38" LT mower deck, 4 42" triangle mower decks, 2 44A mower decks, 2 50C mower decks, 42” GT deck, 3 42" snow/dirt blades, 42" landscape rake, #4 cart |
#8
|
||||
|
||||
Both are great machines,but like Tim said the 149 is easier to work on with the removable tunnel and the hydraulic lift would be nice !
|
#9
|
||||
|
||||
I would go with the 149. The hydraulic lift is nice if you plan to use any rear attachments/ implements. I prefer the looks of the 149 over the 147.
__________________
Adam 1964 Model 100 w/ K301 12hp and custom hydraulics 1972 Model 149 turned 129 w/ K301 12hp, triple hydraulics, 66 series clone |
#10
|
||||
|
||||
If you are planning to resto for a flip, then neither one. Restored cubs rarely bring the money that someone has in them, unless it is the labor of love. If you are a younger fellow, then the 147 has the special frame and would be MY choice for restoring because it was a special cub with the notched frame to accommodate the larger 14 hp in the narrow frame. If you are an older fella, then the 149 has the hydraulic lift built in and is quite helpful for the heavier attachments. When restored, they are probably both worth about the same amount.
I'm going to use some incorrect grammar on you now, so brace yourself..... Why you no post this thread so we vote? It would certainly be easier than filtering through all the posts to help with your choice? Cub Cadet 123
__________________
Still don't know what I'm doing in OHIO?.....If you find me, then please point me back toward INDIANA. |
Thread Tools | |
Display Modes | |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.