Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > Implements and Attachments

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 12-15-2020, 02:42 PM
MrRazz MrRazz is offline
Member
 
Join Date: Sep 2019
Location: Pennsylvania
Posts: 71
Default How much snow is too much for plow

Hi all, winter is here and along with winter comes the snow. Where i live the weather people are calling for 12-18 inches tomorrow night with possible heavy drifting since there will be high winds. I have an IH cub cadet 1250 with a front blade and a snow blower. I also use chains without wheel weights. This is the second winter owning my machine. Last year we didnt have much heavy snow. I used the blower once just to try it out and the rest of the winter i used the blade to plow. My driveway isnt huge but it is larger then average i guess. Its about 125 feet long and fits 3 cars wide comfortabley. The blade worked great last winter but im starting to second guess myself for putting it on yesterday instead of the blower. So my question is how much snow is too much for my setup with the blade before i need to start using the blower?
__________________
Quietline 1250
Reply With Quote
  #2  
Old 12-15-2020, 03:24 PM
Mike McKown Mike McKown is offline
Grand Member
 
Join Date: Jul 2012
Location: Indiana
Posts: 1,825
Default

If you get 18 inches, you may be out of luck with either the blade or the blower without wheel weights. Especially if your drive has an incline.

Up to 12 inches, I'd use the blade. Depends a lot on whether the snow is dry or wet.
Reply With Quote
  #3  
Old 12-15-2020, 03:45 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,751
Default

Plow every 3-4 inches. If you get 18" and wait till it's over you're screwed.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #4  
Old 12-15-2020, 03:46 PM
drglinski's Avatar
drglinski drglinski is offline
Grand Member
 
Join Date: May 2012
Location: Michigan
Posts: 3,939
Default

I'd use the blade too. That doesn't work throw on the thrower and go to town.

Option 2 get another tractor and leave one with the blade on and one with the thrower so whatever you'll need you'll have ready to go.


I've got a blade on my 73 that I've been wanting to try out since I got the tractor in the Spring. That being said I don't really NEED snow either, but it would be nice to play with it a bit.
__________________
Daniel G.




.

(May 1970) 147 w/an IH spring assist, 48" deck, 42" blade, 1969 73, #2 trailer, 10" Brinly plow and (on loan) Dad's #2 tiller.
Reply With Quote
  #5  
Old 12-15-2020, 04:07 PM
ol'George's Avatar
ol'George ol'George is offline
Grand Member
 
Join Date: Oct 2009
Location: MI
Posts: 6,618
Default

All good advice, and if it were me, I'd attach the thrower and keep it cleared every 3-4 inches as Sam says, and get some weight in those rear tires
QUICK or it is pretty much useless.
Main point is stay with, or ahead of it!!!!!
Put on yer snowmobile suit and helmet with a face shield.
I hate snow
Reply With Quote
  #6  
Old 12-15-2020, 04:42 PM
Red Dave Red Dave is offline
Senior Member
 
Join Date: Aug 2019
Location: PA
Posts: 149
Default

A lot depends on what kind of snow you get. Is it a light fluffy snow, or one of the snow/sleet/freezing rain slushy snows that we sometimes get?

For the light fluffy snows, the blower is great. I'd still go out a couple times and not let it get 18 inches deep before you start, or you will have to go through it very slowly. Hard on the blower and hard on the operator too.

For the heavy, wet and snow/sleet/freezing rain slushy snows we sometimes get here in the mid-Atlantic area, leave the snowblower in the shed. They might be better than nothing, but not by much. Those heavy, wet snows are best cleaned off by a blade. Most blowers can't blow the heavy stuff from the center of a driveway to the edge and you end up having to blow it two or three times to move it far enough.

I have one of those 3 stage Cub Cadet walk behind blowers now, and I like it better than the tractor mounted blower I had years ago. It is a snow eating machine if the snow is not too wet, but I use the old Reliable CC 125 with the blade for the wet heavy stuff.
Reply With Quote
  #7  
Old 12-15-2020, 09:17 PM
MrRazz MrRazz is offline
Member
 
Join Date: Sep 2019
Location: Pennsylvania
Posts: 71
Default

Thanks for the advice guys! Its supposed to be a dry fluffy snow coming down at 2-3 inches per hour at times overnight. I guess i will give the plow a try first and see how it goes. The most we got last year was only 8 or 9 inches and my machine did great. Sounds like the cub will be getting a good workout with this storm. Its gonna be a messy thursday morning here in the pocono mountains!
__________________
Quietline 1250
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:29 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.