|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
10-04-2020, 06:08 PM
|
||||
|
||||
Howdy from N Texas. Bought an Original!
Semi-old guy, tinkerer and general DIY kid from way back. Was hanging around my buddies airplane hangar and saw this little faded yellow and cream mower with skinny tires. I asked him about it, and he hadn't messed with it in years.
Well, over a few weeks or a month along, we fiddled around, and moved a few dead planes, and engines and props, and drug it out. The tires were up, and mostly all the bits were there. Having never seen one up close, all I knew as it was a Cub Cadet, but didn't have any idea about the type, or year or anything. I gave him a few bucks and rolled it back to my hangar. One of the spindles was pretty loose, and the bearings in the front pulleys were shot. I had one of the vendors sell me some goodies, and replaced the belt, oil, and cleaned the fuel tank. It fired right up, and ran smooth. Made a few adjustments to the drive belt, and hopped on. All the gears work, clutch works, and steering is a bit sloppy, but pretty nice. It was great not to worry about any safety interlock switches. Just choke, neutral, turn on the gas, and hit the starter. While I had the blades off, I sharpened them with a grinder, and checked the belts are true. This is when I learned the blades have to be timed, or it'll smash the blades together! So, then the toothed belt made sense. Well, I cranked it up, and mowed in front of the hanger, and down the taxiway, and it cuts smooth a clean. What a nice little tool. The only drawback is the speed in third gear. I can see what IH sold so many of them when debuted - it's a winner, even 60 years later. 
|
|
#3
10-04-2020, 08:13 PM
|
||||
|
||||
|
Welcome to OCC. Oh and we love pictures.
__________________
2-1811's 1872 2072
|
|
#5
10-04-2020, 10:29 PM
|
||||
|
||||
|
Welcome to OCC! Nice find. What are your plans for it, use it or restore it?
__________________
125, 126, 147, 129, 149 x 2, 1450, 882, 1810, 1320, 1440, 2135, 2 129’s for parts/project, 1950 Farmall Cub 38" LT mower deck, 4 42" triangle mower decks, 2 44A mower decks, 2 50C mower decks, 42” GT deck, 3 42" snow/dirt blades, 42" landscape rake, #4 cart      
|
|
#6
10-05-2020, 07:38 PM
|
|||
|
|||
|
Quote:
|
|
#7
10-05-2020, 10:36 PM
|
||||
|
||||
|
I'm not a restorer so I'll keep it in good fettle and use it like IH intended. I've mowed plenty, and I use it with a cart to move stuff around the airport.
I can setup a tow beam to move planes, but I have an electric tug made for that purpose. With the walk behind tug, I can see the tail and wingtips better than on a small tractor sitting.
|
|
#8
10-06-2020, 10:31 AM
|
|||
|
|||
|
Hey, great find! I am curious. You wrote:
"...the blades have to be timed, or it'll smash the blades together! So, then the toothed belt made sense." Are you saying that you have multiple blades in the mow deck that are spinde spun via toothed sheaves, like the timing belt arrangement in an engine? And that the blades overlap? That would be very cool. I'm also curious if that deck is original, or an IH at all. It looks custom, but I am a novice.
|
|
#9
10-06-2020, 12:56 PM
|
||||
|
||||
|
Quote:
The blades are arranged perpendicular, and have a small overlap in the center of the deck. If the spindle fails, or the belt breaks, the blades will smash together. I can say it cuts beautifully, and my only minor objection is the limited turning capability compared to modern mowers or the ztr I use on the runway(60" Ariens).
|
|
#10
10-06-2020, 04:04 PM
|
||||
|
||||
|
That deck is an IH built deck, specifically for the Original. I do not know the size, as there's kinda limited info on them.
__________________
 '70 107 with k301 engine swap '71 106 with 38" deck '70 147R with factory replacement k321, 42" deck '61 Original with 38" timed deck '63 70 "pinkie" 1863 with 54" deck '46 Farmall H, '50 Farmall Cub 105 x2 (parts)
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
