PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Broken lift button removal?
On my 147, I broke the lift button off. Any ideas how I can get what is left in there out? I can’t grip it with pliers, I tried bolt extractors, and I can’t get it out.
__________________
125, 126, 147, 129, 149 x 2, 1450, 882, 1810, 1320, 1440, 2135, 2 129’s for parts/project, 1950 Farmall Cub 38" LT mower deck, 4 42" triangle mower decks, 2 44A mower decks, 2 50C mower decks, 42” GT deck, 3 42" snow/dirt blades, 42" landscape rake, #4 cart |
#2
|
||||
|
||||
Your 147 should of had electric lift on it ,the only way to fix what you have is to take the rockshaft and lever off and push the rod up from the bottom or get another rockshaft and arm
|
#3
|
||||
|
||||
Cut 3/8 off the top of the handle with a tubing cutter, then remove the ratchet thingy on the rockshaft then you can grip it.
__________________
Up to 530 and counting... I give up updating my profile! |
#4
|
|||
|
|||
Is it possible to pull it down from the bottom rotate it 180° then let it go back up to original position,except now it wouldn't be in the "catches" of the level adjuster? It might possibly be higher or obtainable now. Just an idea good luck!
__________________
'76 1200 Dad bought '75 1200 "Twinsie" per my daughter |
#5
|
||||
|
||||
Quote:
Quote:
That might work. If not, I’ll take it off, and hopefully it will go up far enough to grab it with pliers.
__________________
125, 126, 147, 129, 149 x 2, 1450, 882, 1810, 1320, 1440, 2135, 2 129’s for parts/project, 1950 Farmall Cub 38" LT mower deck, 4 42" triangle mower decks, 2 44A mower decks, 2 50C mower decks, 42” GT deck, 3 42" snow/dirt blades, 42" landscape rake, #4 cart |
#6
|
||||
|
||||
I would probably pull the rockshaft out from the bottom of the cub, which certainly is not fun, but then you would be in a better position to work on it or just replace it. If you can pull the hook down from the bottom, then you might be able to rotate it around and unscrew the rod from what is left of the button and get it to release. You might have to straighten the hook out of the bottom and that would allow it to be slid through the tube and out of the top of the lift arm. Of course, you would need to re-bend the rod at the same spot if you plan on re-using it.
Cub Cadet 123
__________________
Still don't know what I'm doing in OHIO?.....If you find me, then please point me back toward INDIANA. |
#7
|
||||
|
||||
Quote:
__________________
125, 126, 147, 129, 149 x 2, 1450, 882, 1810, 1320, 1440, 2135, 2 129’s for parts/project, 1950 Farmall Cub 38" LT mower deck, 4 42" triangle mower decks, 2 44A mower decks, 2 50C mower decks, 42” GT deck, 3 42" snow/dirt blades, 42" landscape rake, #4 cart |
#8
|
||||
|
||||
Drill a hOle in the button, then use a easy out.
__________________
Up to 530 and counting... I give up updating my profile! |
#9
|
||||
|
||||
I did this with the busted pin on my 125 a whiles back. Check out the post:
https://www.onlycubcadets.net/forum/...0&postcount=17 This is the thread I started: https://www.onlycubcadets.net/forum/...d.php?t=35965&
__________________
Two 125's and a 124 all with 42" decks Plow blade #2 Cart QA36 snowthower |
#10
|
||||
|
||||
Quote:
__________________
125, 126, 147, 129, 149 x 2, 1450, 882, 1810, 1320, 1440, 2135, 2 129’s for parts/project, 1950 Farmall Cub 38" LT mower deck, 4 42" triangle mower decks, 2 44A mower decks, 2 50C mower decks, 42” GT deck, 3 42" snow/dirt blades, 42" landscape rake, #4 cart |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.