Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > CCC/MTD Cub Cadet built Tractors (GT)
Reload this Page 982 Front Wheel Bearing Spacers
Register FAQ Calendar Mark Forums Read

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 06-15-2022, 02:32 PM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Grand Member
  
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 1,072
Default 982 Front Wheel Bearing Spacers
Has anyone seen these, or have a P/N?

I thought both of my fronts did, but either one rolled away in the shop, or didn't have one originally when I popped the bearings out.

I don't really want to put it back together w/ new bearings and no spacers, but I don't see any sign of them on the CC parts site.

Current situation: I have 4 new bearings, 1 spacer, and 2 rims with new tires
Attached Images
File Type: jpg 982 Front Wheels.jpg (16.6 KB, 58 views)
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote
  #2  
Old 06-15-2022, 02:42 PM
1711Cub's Avatar
1711Cub 1711Cub is offline
Senior Member
  
Join Date: May 2020
Location: Elkland, PA
Posts: 741
Question
The large washer that sandwiches between the 3/8"-16 wheel retaining bolt and the outer wheel bearing?
__________________

582, 682, 782, 782D, 1282, 1050, 1210 x 2, 1711, and 1811
Reply With Quote
  #3  
Old 06-15-2022, 03:09 PM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Grand Member
  
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 1,072
Default
Quote:
Originally Posted by 1711Cub View Post
The large washer that sandwiches between the 3/8"-16 wheel retaining bolt and the outer wheel bearing?
No, inside the wheel. Like a pipe extending from one inner bearing race to the other.

Either only one had it, or both did and the other one rolled away when I knocked out the bottom bearing (I had the wheel in the tire machine at the time).
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote
  #4  
Old 06-15-2022, 06:32 PM
R Bedell R Bedell is offline
Administrator
  
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default
In my IH Cub Cadet TC-193 Parts Manual, there lists NO spacers in Section H, page 60.

__________________
Roland Bedell

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

Buy: Made in the USA
Reply With Quote
  #5  
Old 06-15-2022, 06:59 PM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Grand Member
  
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 1,072
Default
Quote:
Originally Posted by R Bedell View Post
In my IH Cub Cadet TC-193 Parts Manual, there lists NO spacers in Section H, page 60.
So I should be OK to reassemble without either? Guess it wouldn't really hurt to have one on the one side.

The little ones don't have any, but I understand why you'd add one.
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote
  #6  
Old 06-17-2022, 10:16 AM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Grand Member
  
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 1,072
Default
Good news. Cleaned up the one I had and it's clearly homemade. Someone cut galvanized pipe with a sawzall (not very square either). Moved on without them.
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 08:10 PM.

www.onlycubcadets.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.