Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Speciaalties R. F. Houtz and Sons

Patton Acres IH Cub Cadet Parts

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > Customized Cub Cadets

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 01-04-2014, 09:10 AM
gophred's Avatar
gophred gophred is offline
Senior Member
 
Join Date: Dec 2013
Location: NY
Posts: 121
Default 129 foot pedal for speed control

I've been wanting to do this for a while and finally started. I saw some old posts on this, but the way I wanted to do it was a little different. I wanted to control the speed thru the existing lever on the dash speed control post. For the new linkage, I used steering ball joints and threaded rod. I found the ball joints (same as Cub parts) on Mcmaster carr for $5 ea. I salvaged the The pivot rod from the foot pedal, the mounting brackets (high quality dumpster diving)... The 90 degree mounts with the bronze bushings, bolt into existing frame holes. The only hole I drilled was in the existing speed control post lever where the rear ball joint mounts. I will have to trim the side cover panels a bit where the new rod comes out. Below are some pics. first from the right side, then from the engine view looking back under the console, finally looking forward from the seat. My mcmaster bill was $60 which included enough to do this to 3 cubs and even included 3 sets of parts for the steering upgrade (bearings, nuts and washers). I plan to add this to another 129 and a 1250 if it works out. So far seems to work really well. The brake pedal still returns you to neutral and the hand speed control still works. This mod also seems to eliminate (or avoid) any creep issues as your foot holds things where you want. I will have to lift my foot for the brake to return to neutral, but in reality I don't see needing the brake much
Attached Images
File Type: jpg 006 right side.jpg (31.3 KB, 1177 views)
File Type: jpg 008 left side.jpg (32.4 KB, 1172 views)
File Type: jpg 034 rear view.jpg (29.5 KB, 1172 views)
Reply With Quote
  #2  
Old 01-04-2014, 12:58 PM
Muzzy Muzzy is offline
Senior Member
 
Join Date: Oct 2012
Location: Massachusetts
Posts: 497
Default

Welcome to OCC. Good job.
Reply With Quote
  #3  
Old 01-04-2014, 02:14 PM
gophred's Avatar
gophred gophred is offline
Senior Member
 
Join Date: Dec 2013
Location: NY
Posts: 121
Default

Thanks. I have been a lurker, here and on a few other forums. I got the steering upgrade numbers somewhere and would credit if I could find them again. I will post the Mcmaster-carr #'s after I do the upgrade and ensure they are correct. I bought the thrust needle-roller bearing ($1.07ea) washers and Nylocs.
The mcmaster-carr # for the ball joint is 6058k28 "ball joint, shielded, steel, 3/8"X24 right hand thread". This appears to be an exact match for the older cub steering ball joints (at a cost of $4.18 vs $14). The thread on the arm side and the stud are the same 3/8"X24 so that is the rod I used (Mc #98957a805 $3.43 for 2 feet) and used nyloc nuts (mc #97135a235). not sure if this rod would be strong enough to make whole linkages for the steering, but it would work in a pinch
__________________
Gophred
2 - 1811's with 50C decks, one mows the other is waiting on deck, 129 (my sons retromod)-, hydro lift, custom 3 pt with a trailer ball , foot pedal speed control, used for trailer hauling. 129 (mower) 42" deck, foot control, 1810 with 44C - next in the slow death march of mowing the camp. a few 1200 series parts rigs. 2017 Kubota b2650 loader mid mower.
Reply With Quote
  #4  
Old 01-04-2014, 10:47 PM
ACecil's Avatar
ACecil ACecil is offline
Grand Member
 
Join Date: Mar 2009
Location: North Carolina
Posts: 23,502
Default

Welcome to OCC, and nice work!
__________________
Allen
Proud owner of my Original!

My Grandpa's Cart
Craftsman Lawn Sweeper
Craftsman Plug Aerator
Reply With Quote
  #5  
Old 01-05-2014, 06:33 AM
Cubcrazy's Avatar
Cubcrazy Cubcrazy is offline
Grand Member
 
Join Date: Dec 2009
Location: PA
Posts: 9,200
Default

Welcome to OCC! Good work!
Reply With Quote
  #6  
Old 01-05-2014, 09:41 PM
sawdustdad's Avatar
sawdustdad sawdustdad is offline
Grand Member
 
Join Date: Dec 2012
Location: USA
Posts: 2,627
Default

That's pretty neat. I like the way you keep the original controls. That is a design elegant in its simplicity. Nice job, and welcome to OCC!
__________________
Reply With Quote
  #7  
Old 01-15-2014, 09:24 PM
gophred's Avatar
gophred gophred is offline
Senior Member
 
Join Date: Dec 2013
Location: NY
Posts: 121
Default

Foot pedal for the 1250. Similar to the 129, but the speed control for this model is a lot different (front to back lever on right side of dash vs "wiper" style on low left dash). Because the dash speed control was pretty tight (sticky even after lubing) I removed the linkage so the dash lever is no longer functional. The new linkages still turn the shaft that the dash linkage turned, thru the lever that the stock shaft uses to push/pull the stock linkage heading rear. Had a chance to play with this out in the frozen yard today - it rocks! By the time I manuvered out of the garage it felt pretty natural. Now if I could just get it to drift
Attached Images
File Type: jpg 012 small.jpg (26.0 KB, 1016 views)
File Type: jpg 014 small.jpg (22.8 KB, 1016 views)
File Type: jpg 015 small.jpg (18.3 KB, 1009 views)
__________________
Gophred
2 - 1811's with 50C decks, one mows the other is waiting on deck, 129 (my sons retromod)-, hydro lift, custom 3 pt with a trailer ball , foot pedal speed control, used for trailer hauling. 129 (mower) 42" deck, foot control, 1810 with 44C - next in the slow death march of mowing the camp. a few 1200 series parts rigs. 2017 Kubota b2650 loader mid mower.
Reply With Quote
  #8  
Old 01-16-2014, 01:54 PM
Sam Mac's Avatar
Sam Mac Sam Mac is online now
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,746
Default

That is pretty sweet!
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #9  
Old 01-17-2014, 06:49 AM
dag1450 dag1450 is offline
Senior Member
 
Join Date: Apr 2012
Location: PA
Posts: 105
Default

Nice job ! That would come in real handy when snow blowing and plowing. Sometimes there just are not enough hands. lol Welcome ! Dave
Reply With Quote
  #10  
Old 01-18-2014, 09:16 AM
gophred's Avatar
gophred gophred is offline
Senior Member
 
Join Date: Dec 2013
Location: NY
Posts: 121
Default

This being the camp mower, I am hoping it frees up a hand for a cold beverage. This tractor creeps up or down in speed with hills and rough ground, between that, hard steering and ground to rough for a cup holder I thought this was the best solution. I did upgrade the steering and went thru it all the pivots in the front end, so hopefully that will be better. Someday I'll adress the creep problem, but the foot pedal bypasses the need for the damping to work properly
__________________
Gophred
2 - 1811's with 50C decks, one mows the other is waiting on deck, 129 (my sons retromod)-, hydro lift, custom 3 pt with a trailer ball , foot pedal speed control, used for trailer hauling. 129 (mower) 42" deck, foot control, 1810 with 44C - next in the slow death march of mowing the camp. a few 1200 series parts rigs. 2017 Kubota b2650 loader mid mower.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:36 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.