PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#21
|
||||
|
||||
Hey Zelda, I'm middle of the mitten too! We must be close. I'm in St. Johns, just North of Lansing.
|
#22
|
||||
|
||||
What a great idea. That table will come in handy for any piece of equipment. Time to start collecting materials. Thanks for sharing those pics.
|
#23
|
|||
|
|||
That is a GREAT idea!!!!
Thanks for posting the photos of the tables. |
#24
|
||||
|
||||
so there is a better mouse trap. :biggrin2.gif: I guess that's essentially the same concept as a car lift in a garage. At the height of those does it eliminate the need to totally get underneath of the tractor or are you still going to have to crawl for that?
I'm 30 (still have to get used to saying that...), but 6'3" and too much football and 3 ruptured discs later, sometimes I'm pretty stiff and concrete doesn't help that much either. This is all I need to fill up my garage with now. The wife will never get her car back in!!
__________________
Gary '49 Farmall Cub, '62 "Original, '70 73 w/402-D Haban sickle, '71 127 w/38" cast end deck, '73 149, '76 Sof76, '07 LT1045 w/bagger, '09 GT2544 w/bunch of mods. 5 Exmarks, Kubota B2920, blah, blah, blah... |
#25
|
||||
|
||||
Check on Harbor Freight and Northern Tools. Both have scissor lift tables that would be perfect for what you need and are surprisingly inexpensive.
__________________
Tony Stafford, VA 1650, 682... |
#26
|
||||
|
||||
Or if your poor like me, you could just dig a hole in the yard to drive over.:biggrin2.gif: Could come in handy around Halloween.
__________________
I'm not fat, I'm just fluffy |
#27
|
|||
|
|||
Is that made of wood?
I am all for a better mouse trap, but I am also a bit of a coward when it comes to getting under a 700# tractor supported by wood. I know wood ramps are great (had a set until one kicked out on me loading my 1650) and can stand up to a bunch of weight... and I did buy a set of aluminum ones with safety chains. But when it comes to 2X4's supporting a stationary tractor the size and weight of a CC, I still feel better with some form of metal.
That rack just looks risky. Hey how about a positive ending I like the space ya got in that garage and at lest you got a lift table and I don't. |
#28
|
|||
|
|||
I got mine at Harbor Freight .
|
#29
|
|||
|
|||
I work at a chrysler dealer and picked up a bedslider for 25 bucks that came out of a trade in. I'm planning on splitting it and making some legs and a front base and using a hand crank boat winch that is laying around to raise and lower it. If it wasn't to long for my truck bed I would just mount it up and use it for what it was made for. Oh well hopefully in the spring!
__________________
Bob. 2550 with sleeve hitch 1250 with tiller, blade, deck 826 snowblower Past machines 72,1650 |
#30
|
|||
|
|||
Neat idea on the table
That is a darn neat idea on that heavy duty table. I wish I had room for one.
Funny story from a friend of mine. He went to see his dad one afternoon, drove up in the drive way and beside the garage was his yard tractor hanging from a cumalong hooked to the front axle and pulled vertical up toward a big tree limb. The tractor was smoking and soon burst into flames. Gas had ran out of the tank, some oil got out also, and the battery slid back in the holder and shorted to the frame and set the whole thing on fire. He asked his dad why he was roasting the tractor, did he get mad at it? His dad said no I just raised it up to sharpen the blades on the mower. When they rounded the corner of the garage it was too late....no need to worry about the blades. His dad said " My oh My" among other things, look what I have done now. Dave |
Thread Tools | |
Display Modes | |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.