Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > Implements and Attachments
Reload this Page 1811 - Trying to Install Tiller
Register FAQ Calendar

Notices

Reply
Page 2 of 2 1 2
 
Thread Tools Display Modes
  #11  
Old 09-21-2017, 08:40 AM
J-Mech J-Mech is offline
Banned
  
Join Date: Apr 2013
Location: Oblong, Illinois
Posts: 17,594
Default
The important thing to note about the 782 and the 1811 is that while they are the same tractor, they are a little different. The late 782 and the 1811 are the same. *Most* 782's have a cast iron rear (later ones didn't). All 1811's have an aluminum rear. The issue is that the aluminum rear won't accept the bolt on gear box. You can't even drill the gear box mounting to go on. The frame work for the box is in the way to drill it for the aluminum rear. So, all you are doing is making a plate that is very close to the rear end, so that the box can be bolted on. Now... that's all you really have to do. I made a quick mounting system so that I could easily remove the tiller, but that isn't necessary. Make sure that whatever you make is bolted to the frame, and the sides of the trans case, preferably through the lower axle mount bolts. Don't use the bolts on the rear cover. The other issue you will encounter is that it will take a longer than specified belt. You will also need the 5/8" pulley on the lower tiller gear box pulley. I'm sure you know, but you will need a sleeve hitch set up off of an '82 series hydro tractor. (682/782). It's really not a difficult build at all.
Reply With Quote
  #12  
Old 09-22-2017, 07:02 AM
jkmola jkmola is offline
Member
  
Join Date: Sep 2010
Location: MI
Posts: 35
Default
Ahhhhh, I'm starting to get the picture now! Thanks for the detailed description. I think I now can get it from here. Do you think 1/4" plate is heavy enough? Or should I go a little heavier?
Reply With Quote
  #13  
Old 09-22-2017, 09:00 AM
J-Mech J-Mech is offline
Banned
  
Join Date: Apr 2013
Location: Oblong, Illinois
Posts: 17,594
Default
I used 3/16". We're not pulling big equipment here. Look at the frame on the tractor. It isn't even 1/4". 3/16" plate is heavy enough.
Reply With Quote
  #14  
Old 09-23-2017, 07:01 AM
jkmola jkmola is offline
Member
  
Join Date: Sep 2010
Location: MI
Posts: 35
Default
Great. I can get to it now, and see what I can come up with. Boy wants to break some ground for a garden this fall and get the soil ready for planting in the spring. Pressure is on! Thanks again
Reply With Quote
  #15  
Old 09-23-2017, 08:38 AM
J-Mech J-Mech is offline
Banned
  
Join Date: Apr 2013
Location: Oblong, Illinois
Posts: 17,594
Default
Better get a plow. Tillers don't break ground very well at all.
Might in the spring when it's soft.... but not now.
Reply With Quote
  #16  
Old 09-24-2017, 04:15 PM
Rescue11's Avatar
Rescue11 Rescue11 is offline
Grand Member
  
Join Date: Apr 2011
Location: Nebraska
Posts: 1,490
Default
Quote:
Originally Posted by J-Mech View Post
Better get a plow. Tillers don't break ground very well at all.
Might in the spring when it's soft.... but not now.
X2, have done this many times and it just beats the living piss out of everything. Actually either get a plow or a field cultivator. Well they're not really a field cultivator there just a coil tine more like a chisel plow. Hang weights off of them and you can sink it in farther than the tractor will pull it.
__________________
1- 1864 Dual hyd, cat 0, axle braces
1- 1450 Dual Stick w/ power steering
1- 1200 in pieces
1- 1864 in pieces
QA36A Thrower, #1 Tiller w/ extensions, IH windbreaker, IH wheel weights, 44C mower deck, 50C mower deck, CCC 54" Blade, GT46 high vacuum deck, GT54 deck, Cub Tripple Bagger, Custom dozer blade, Custom suitcase weights, 3pt cultivator, lawn sweeper, original R-Bucket
Reply With Quote
Reply
Page 2 of 2 1 2

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 09:21 AM.

www.onlycubcadets.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.