PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Leroy, Sunrise Lake area
|
#12
|
|||
|
|||
Spending income? Taking back cans for 10 cents is funding this project... it helps I'm always thirsty..
Can anyone provide the OD of the Drive Pulley? Going to use a double V-grove to power a hydraulic pump as well as the belt to the starter/generator. |
#13
|
||||
|
||||
Nothing against adding the pump, but I'd hate to see you go through the time and expense without making sure you know that a lot of hydrostatic cub rear ends have ported pumps.
Someone's definitely going to chime in and correct me here, but any model ending in an odd number or 50 with a lever coming out of the right side of the dash tower is likely a winner. These rear ends are bulletproof and never fail, therefore they are readily available and dirt cheap. Some tractors are even set up with dual port hydraulics, complete with the valves. Totally worth looking at if you're looking at spending money on a pump, valves, and a set of bigger front spindles, along with time fabricobbling it all together.
__________________
Grumpy old 149/1A tiller, Trusty Rusty 106, & a Massey Ferguson 10 to work the garden, Tiny Snapper to mow the lawn. Slowly accumulating attachments and quickly driving the neighbors crazy on a half acre homestead. |
#14
|
||||
|
||||
Quote:
Welcome to OCC Higgins! Have you searched on Facebook? You can find some pretty good deals on there from folks who just want to get rid of there tractors they'd lost interest in. There's quite a few in MI. Go to marketplace and put in your location and the search distance. I found this one that was just listed yesterday. A good deal with attachments as well. https://www.facebook.com/marketplace...2361473470131/ Best of luck! |
#15
|
|||
|
|||
Well, it lives... and sounds great, if I can keep it running. Fuel delivery problem, aside from that she's cherry....
On another note, the wiring heats up quick when wired to the regulator per the schematic, bypassing the safety switch and not lighting.... I'm running it on the bench before I make the transplant to the tractor. Specifically the wire coming off the battery side of the starter solenoid to the ignition switch (also bypassing the amp meter). If I eliminate the white wire from the regulator to the key switch, it fires up and runs good, however now the generator is not putting out. The regulator is brand spanking new. If I wire it per the schematic, there is function of the key switch and as stated before the wire from the key to the starter solenoid gets hot and will burn if I don't disconnect it..wish I could figure out how to add the drawing to this thread.. |
#16
|
||||
|
||||
Quote:
__________________
Cooperino 100, 104,125, 126, 2x129's, 804, 1211, 1641 |
#17
|
|||
|
|||
Yes, it's an after market and the terminals are not the same as the OEM, however still identified and I confirmed about 10 times it's wired correctly. Had my two sons who are mechanics look at it and they are scratching their heads as me! I'm missing something.
bench wiring.jpg Yeaaaaa I figured out how to attache the wire diagram. The green wire wire from the regulator is white in real life... |
#18
|
|||
|
|||
All is well, had the VR wired incorrectly. Terminal out the back was not the ground...live and learn. The 127 runs great with fresh 241. I put a scoop on the front for now, works great cleaning out hog stalls. Picked up a 128 with cracked block for $100.00 including a running k241. Everything appears to be in working order. Can anyone tell me if the M12 block and K301 block are the same and interchangeable?
|
Tags |
k241, k301 |
Thread Tools | |
Display Modes | |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.