PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
That Cincinnati mill would be perfect for my needs. Thanks for posting. About an 8 hr drive for me. I'll keep looking for something closer.
__________________
|
#12
|
||||
|
||||
some in my neck of the woods
https://raleigh.craigslist.org/searc...illing+machine https://fayetteville.craigslist.org/...484572854.html https://greensboro.craigslist.org/hv...482292208.html https://raleigh.craigslist.org/hvo/d...480267797.html
__________________
2072 w/60" Haban 982 with 3 pt and 60" Haban 1811 with ags and 50C 124 w/hydraulic lift 782 w/mounted sprayer 2284 w/54" mowing deck |
#13
|
||||
|
||||
OK, after several weeks of looking and talking, I found a mill in Virginia Beach, about 100 miles south of me. Brought it home today. It's dated 1981 but was hardly used. It's a Bridgeport Taiwanese clone. 2hp, 3ph. No tooling, only a vise. Has X and Y DRO, X and Z axis power feed, oiler, and a mister. No discernable wear on the x or y axis as movement of the bed does not reveal a change in effort as they are transversed from end to end of travel. I wish I had been able to get some tooling, but the owner was shutting down his shop (he had four mills) and took the best mill and all the tooling home with him.
The seller loaded it on my flatbed trailer with his forklift, I blocked the base and I strapped it down, drove it home and rented a skid steer with pallet forks at home to unload it. A 4x4 under the top turret spanning the forks balances the mill perfectly. Now just need to get it in final position in the shop and wire it up with a variable frequency controller. Ordered some R8 tooling to get started. Will take me a week or more to get it set up and tuned/trammed in.
__________________
|
#14
|
||||
|
||||
Looks great SDD & keep feeding us the pics. I hope to have something like that someday.
__________________
This ain't no hobby....it's an addiction |
#15
|
||||
|
||||
Congratulations on your new toy! Six months from now you'll wonder how you ever lived without it.
__________________
149, 2072, Original, 1772, 1782, #1 cart, Parker 48" sweeper, |
#16
|
||||
|
||||
Congrats. Haven’t seen a belt pulley speed change machine in awhile.
Have fun! Although I doubt the sanity of people will who want a hobby doing what I’ve done for a living for 30yrs.
__________________
Terry O,100,72,102,123,104,124,105 125,129,149,1200,982 (2)2182s w/60in Habans 3225 |
#17
|
||||
|
||||
Quote:
This replaces the Vacu Form I've been using....
__________________
|
#18
|
||||
|
||||
Or you can make some cool things to form around!
__________________
Terry O,100,72,102,123,104,124,105 125,129,149,1200,982 (2)2182s w/60in Habans 3225 |
#19
|
||||
|
||||
What brand is it? Looks a little like the Supermax we had when I started. Ours were mid to late 80's models. I bet being a step belt setup that the machine has less wear--everyone gravitates toward variable in a shop (unless there isn't one available).
The mister is probably a KoolMist setup. We used to run them ALL the time. Now I bet we only have 2 or 3 in the shop and they rarely get cut on--those things will smoke you out and it can't be good to breathe! We used to cut the exhaust fan on several times a day to clear the air. When you buy a vise, try to find the widest opening you can (6" width is pretty standard). Back when that mill was built, 6" opening was normal, but Kurt managed to push it to almost 9--I am assuming the Chinese copied everything they did. A cheap set of 1/8" parallels will be fine for a home shop. Good luck with your new toy, I wish I had shop room for a full sized machine.
__________________
2072 w/60" Haban 982 with 3 pt and 60" Haban 1811 with ags and 50C 124 w/hydraulic lift 782 w/mounted sprayer 2284 w/54" mowing deck |
#20
|
||||
|
||||
Quote:
I got a vise with it, though I have not checked it out yet to see if it's any good. I'm going to remove the "machine world" name plate to see what is under it...no reason for that to be so big if it weren't covering something else up? I have not yet been able to move it into position, still trying to determine best place for it in the shop. Busy with other chores for the next couple days...
__________________
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.