PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Looks like this place has them available. https://www.cubcadetpartsnmore.com/m...continued.html
But please contact the sponsors above first. |
#12
|
|||
|
|||
As long as it's in a mower, it should be the same. What is it in then???
|
#13
|
||||
|
||||
The one I have the linkage is bolted to the carb on the 2072 it’s bolted to the intake manifold and is a different spring
|
#14
|
|||
|
|||
Listen, I can't help you if you don't cough up some info.
I need: 1.) The engine application, or model spec numbers. I'd rather have both. 2.) A picture of your set up I'm still going to say that the spring won't affect how it runs, only how it regulates speed. Where's the video you said you would post? |
#15
|
||||
|
||||
Number 8 is the spring I need
|
#16
|
||||
|
||||
Model number m20qs ....... serial number 1908213506.......... spec number 49514 thanks for your help guys
|
#17
|
||||
|
||||
The engine is in my power king 1620
|
#18
|
|||
|
|||
So... I see what you have now. That helps. That throttle set up is the oddball one, which is likely why the discontinued the spring. That, and lets be honest, it's a 30+ year old motor.
Lets go back to the hardware store spring comment..... when I said that, I meant like a completely off the wall spring. Like too big, too short, too stiff. But in this case, a hardware store spring is likely what I would do... but I understand how the governor needs to work, so I can find a spring close enough to do the job. Just because the end of your spring looks "crimped" doesn't mean that it isn't an original spring. The end may have just worn off of it and they spun up another coil and bent the hook on it. Doing so wouldn't affect anything, as long as they rechecked the high idle no load. SO...... back to the REAL issue. Why do you think the spring needs replaced? How about a picture of the spring on your engine, in the tractor. This is the last time I'm saying this..... I really don't think it sounds like the spring is the issue. I'm pretty sure at this point you are going on a wild goose chase after a discontinued part that isn't going to do anything to fix the issue you have. |
#19
|
||||
|
||||
Here are some pictures. When I tried to increase the rpm from 2500 to 3400 when the engine is under a load the throttle will go wide open and floods the engine but if I put it back to 2500 it runs great 👍 again thanks for the help
|
#20
|
|||
|
|||
Quote:
That spring is fine. Nothing wrong with it at all. BUT.... it is in the wrong hole on the governor arm. You need to move it in to the third hole at least. 7E47BF65-0DD1-4D8E-A974-65732C13A81B.jpg Honestly, the throttle cable is in the wrong hole too. It's supposed to be in the top hole. |
Thread Tools | |
Display Modes | |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.