Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > Cub Cadet Engines > Kohler Engines
Reload this Page K301 grass screen
Register FAQ Calendar Mark Forums Read

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 04-29-2022, 04:37 PM
RoseHillFarmIHCC125 RoseHillFarmIHCC125 is offline
Senior Member
  
Join Date: Apr 2022
Location: Georgia
Posts: 231
Default K301 grass screen
I have the engine out of my 125 now. Step 4 on page 1-11 of the IH Cub Cadet shop manual and page 10.3 of the Kohler K-series shop manual says to remove grass screen with no specifics. Is the nut that holds the flywheel on also hold the small pulley and grass screen on? It’s a 15/16” nut and I didn’t bring my big 1/2” drive impact home today, so I can’t get it off anyway.
Reply With Quote
  #2  
Old 04-29-2022, 05:53 PM
finsruskw finsruskw is offline
Grand Member
  
Join Date: Mar 2013
Location: Iowa
Posts: 2,990
Default
yes
If you remove the 4 screws that hold the screen to the pully/adaptor, which is made of aluminum, you run the risk of breaking the screws off.

If you remove the ass'y by taking off the nut on the end of the crankshaft you will have to re-torque it when reinstalling which means having to hold the crank from turning while you do that.
Reply With Quote
  #3  
Old 04-30-2022, 07:00 AM
RoseHillFarmIHCC125 RoseHillFarmIHCC125 is offline
Senior Member
  
Join Date: Apr 2022
Location: Georgia
Posts: 231
Default
So is it safe to use a three jaw puller to remove the pulley and grass screen together?
Reply With Quote
  #4  
Old 04-30-2022, 08:12 AM
finsruskw finsruskw is offline
Grand Member
  
Join Date: Mar 2013
Location: Iowa
Posts: 2,990
Default
I never have used a puller on one.
It is held on by the nut or bolt on the end of the crank shaft, depending on which model you have.

Be advised there is a steel locating pin in the flywheel that inserts into the aluminum pully that will more than likely be corroded and stuck.

Be careful not to get too violent with this as you may break out the area of the aluminum pulley that it sets in.
Reply With Quote
  #5  
Old 04-30-2022, 08:14 PM
RoseHillFarmIHCC125 RoseHillFarmIHCC125 is offline
Senior Member
  
Join Date: Apr 2022
Location: Georgia
Posts: 231
Default
What’s the best way to remove the pulley and grass screen? The blower housing is captured by the grass screen on mine.
Reply With Quote
  #6  
Old 04-30-2022, 09:52 PM
West Valley G West Valley G is offline
Senior Member
  
Join Date: Mar 2016
Location: Three Forks, MT
Posts: 804
Default
I know lots of guys beat and pry to get the fly wheel off. Been known to
do it myself on occasion. Now I have a fly wheel puller. They are relatively
inexpensive and make pulling it a whole lot easier. I would recommend a trip
to the auto parts store or Amazon or somewhere and get a Flywheel
puller. One time purchase and you will have it for lots of projects.

Ken
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:29 PM.

www.onlycubcadets.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.