PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Deck leveling on a GT 54" 324-190
Hello all,
I have entitled deck on a Cyclops 2182. Had some questions about the deck. 1. Should the "mule" (lift frame) bear most of the weight, or the adjustable ball rollers, on the deck?. 2. Should the "leveling bolt," be tightened down on the center frame leg? Or, used to "level" the front to back adjustment? Seems that one is contrary to the other. If the ball rollers are used to adjust height, then what is the purpose of the "jam" nut on the front lift bracket? If I leave the deck leveling bolt loose from the leg, it will rattle when mowing. Your opinion please, Vertigo1... |
#2
|
||||
|
||||
Go here for the manual and enter 190-324-100. serial #123456
It shows you what you need to know. http://manuals.mtdproducts.com/mtd/P...randCode=10051
__________________
Up to 530 and counting... I give up updating my profile! |
#3
|
|||
|
|||
The front hangers are to adjust hi/lo, fore/aft.
Opinions vary on what carries the deck weight. Mine is.................. The lift frame carries the weight, the wheels hit the grass but carry no continuous weight except the high spots on the ground. My reason? Deck wheels wear, deck axles wear. The wheel mounting brackets wear. They're all three expensive to replace. Just get them above the ground and they'll last forever and still cut evenly. The other thing. when you run the wheels on the ground, you run the risk of tearing off the wheel mounting brackets, and/or bending them out of shape. I have about 10 of these GT 48" and 54" decks and at least half them had been damaged by running them too low by previous owners. Once repaired, no problem with them. |
#4
|
|||
|
|||
Thanks for the advice.
The manual stats to use the "ball" wheels to adjust the mowing height. I tried Mikes suggestion and like it better. Maybe I'm just reading it wrong.
I seem to be able to mow a bit faster, plus less drag marks in the finished product. Thank you both for your suggestions. Vertigo1... |
Tags |
2182, deck, gt 324, leveling |
Thread Tools | |
Display Modes | |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.