Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > CCC/MTD Cub Cadet built Tractors (GT)

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 06-19-2021, 10:51 AM
MSS7120's Avatar
MSS7120 MSS7120 is offline
Senior Member
 
Join Date: Dec 2020
Location: Minnesota
Posts: 140
Default 3000 series PTO question

On the 3000 series does anyone know what PTO yokes will fit? The pto from my snow blower will notch right on with no problem. I have an extra mower deck and removed the pto from that and it won't fit. The working length of the exposed shaft is just slightly too short on the front. The locking mechanism won't engage. Please note that this is only a problem on the front side shaft. The rear facing shaft works just fine.

Found this,
https://www.weasler.com/product/6-se...ng-lok-yoke-5/

They don't publish the working length of the shaft. I have something similar on order from a local supplier.

Has anyone else ran into this problem? Any solutions?

Meanwhile I"m trying to invent a shaft stretcher.... Just like the wire stretcher when you run your wires through the house or car and just a couple of inches too short. That's a joke in case it's hard to tell...
__________________
Mark from Minnesota

3165 with CC Snow Blower, Front blade, Sims Cab
3185 with 3pt hitch, it runs now. But not well.
48in and 52in mower decks
2185 with mower from my dad when I have a project for it.
Massey Ferguson Model 70 corn planter.
CC yard cart
Reply With Quote
  #2  
Old 06-20-2021, 08:53 AM
ejl6658 ejl6658 is offline
Senior Member
 
Join Date: Aug 2017
Location: Johnstown, Pennsylvania
Posts: 219
Default

I think this post will answer your question.

https://www.mytractorforum.com/threa...#post-12511081
Reply With Quote
  #3  
Old 06-21-2021, 08:49 PM
MSS7120's Avatar
MSS7120 MSS7120 is offline
Senior Member
 
Join Date: Dec 2020
Location: Minnesota
Posts: 140
Default

Spot On, Thanks for the information..


Quote:
Originally Posted by ejl6658 View Post
I think this post will answer your question.

https://www.mytractorforum.com/threa...#post-12511081
__________________
Mark from Minnesota

3165 with CC Snow Blower, Front blade, Sims Cab
3185 with 3pt hitch, it runs now. But not well.
48in and 52in mower decks
2185 with mower from my dad when I have a project for it.
Massey Ferguson Model 70 corn planter.
CC yard cart
Reply With Quote
  #4  
Old 07-10-2021, 11:02 AM
MSS7120's Avatar
MSS7120 MSS7120 is offline
Senior Member
 
Join Date: Dec 2020
Location: Minnesota
Posts: 140
Default

Got this through a local supplier. It mounted up to a JD pto from my broom and slipped right on the front pto shaft for the 3000 series.

Thanks for the assistance elj6658, it was a large help.





https://www.weasler.com/product/6-se...ng-lok-yoke-5/
__________________
Mark from Minnesota

3165 with CC Snow Blower, Front blade, Sims Cab
3185 with 3pt hitch, it runs now. But not well.
48in and 52in mower decks
2185 with mower from my dad when I have a project for it.
Massey Ferguson Model 70 corn planter.
CC yard cart
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.