PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Hydraulics help
Just got done putting a jd 2 way hydraulic spool valve in my 1811 and can't get the handles to move like it's stuck won't go up or down
|
#2
|
||||
|
||||
Sounds like the hydraulics are dead heading.. Show us a diagram of your hydraulics.
__________________
Cooperino 100, 104,125, 126, 2x129's, 804, 1211, 1641 |
#3
|
|||
|
|||
Do you mean the handles are locked and wont move?
Or when the handles are moved, nothing happens? |
#4
|
|||
|
|||
Handles won't move at all can't get them to come up
|
#5
|
|||
|
|||
Tee off for pair in back to when I took the line in off to check there was fluid coming out
|
#6
|
|||
|
|||
Quote:
__________________
Roland Bedell CC Models: 100, 105, 1450, 782, (2) 784, & 2072 Buy: Made in the USA |
#7
|
||||
|
||||
If it's hydraulic pressure holding them, they should move freely with the engine off since there will be no pressure present.
If they still don't move with the engine off, disconnect the linkage. Does the linkage move freely? If so, then the problem is in the valve itself, most likely stuck from moisture as Roland has said.
__________________
149, 2072, Original, 1772, 1782, #1 cart, Parker 48" sweeper, |
#8
|
|||
|
|||
I can turn them around and around but will not come up or down will shoot some PB on them
|
#9
|
|||
|
|||
Ok got them to go up and it works just got to tighten stuff up Thanks a lot guys
|
#10
|
||||
|
||||
When installing used components (and new for that matter) it's best to check the operation of the moving parts BEFORE you install them.
__________________
149, 2072, Original, 1772, 1782, #1 cart, Parker 48" sweeper, |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.