Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > CCC/MTD Cub Cadet built Tractors (GT)

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 06-02-2022, 09:53 PM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Grand Member
 
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 1,073
Default Saving a 1982 Yellow & White CCC 782

I acquired this Y/W 784 about a month ago when picking up a 1641. Both were headed to scrap, so they threw in this tractor. Sitting 10-20 years (owner got it in the same condition I did), it has the original KT17 Series II.

I was curious why it still has the IH S/N/Model # system, despite being CCC produced in 1982 (I surmised from the 142 in the model).

782 142 U
700455

My immediate plans are to rebuild the carb (once a kit shows up) and see how she runs. Intake manifold and carb were off when I got it. Fuel pump runs good, and I replaced the lines/filter. Engine being somewhat apart I had assumed it threw a rod like most KT17s like to (I had that experience with a Series II in my 1711, too), but it has good compression and doesn't seem to have any extra holes.

I did have to get a new front tire, and found a matching Turf Saver to compliment the other side. Short term plans are mounting some R1 Goodyears I picked up and adding a sleeve hitch that was destined for the 1811, but seems like a better fit on the cast rear (saves $80 for the Xtreme tabbed ear U hitch).

Jeff should have a Brinly adapter shipping out for me Monday, so outside of fabricating a lift rod to match the one on the 1711 I should be good to go on both of those aspects.

An aside, Rustoleum transport yellow seems to match the Iron Guard I used on the 1811 wheel weights last fall (and goes on a lot better/thicker). If it were a bigger project I'd look harder for Rustoleum Marigold.
Attached Images
File Type: jpg 782 R1 Goodyear Rear Tires Canvas Whtie.jpg (30.0 KB, 167 views)
File Type: jpg Transport Yellow vs Iron Guard.jpg (23.9 KB, 166 views)
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote
  #2  
Old 06-02-2022, 10:01 PM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Grand Member
 
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 1,073
Default

Some pictures of when I first got it (on the trailer) and how it looked tonight.
Attached Images
File Type: jpg 782 1641 Arrival.jpg (30.3 KB, 166 views)
File Type: jpg 782 R1 Goodyear Rear Tires Canvas White .jpg (25.5 KB, 165 views)
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote
  #3  
Old 06-03-2022, 07:03 AM
1711Cub's Avatar
1711Cub 1711Cub is offline
Senior Member
 
Join Date: May 2020
Location: Elkland, PA
Posts: 741
Thumbs up

That is a super early CCC tractor-probably has the Brownsville Tenn address on the tag, instead of Cleveland, OH.
__________________

582, 682, 782, 782D, 1282, 1050, 1210 x 2, 1711, and 1811
Reply With Quote
  #4  
Old 06-03-2022, 07:46 AM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Grand Member
 
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 1,073
Default

Quote:
Originally Posted by 1711Cub View Post
That is a super early CCC tractor-probably has the Brownsville Tenn address on the tag, instead of Cleveland, OH.
Yes, exactly! Thought that was neat. Cast rear too.

Almost seems too early to have the Series II?
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote
  #5  
Old 06-03-2022, 08:17 AM
1711Cub's Avatar
1711Cub 1711Cub is offline
Senior Member
 
Join Date: May 2020
Location: Elkland, PA
Posts: 741
Lightbulb

The KT17 Series I were installed in Chassis Serial Numbers below 726124.

The KT17 Series II were installed in Chassis Serial Numbers above 726125.

Obviously, almost all the Series I have been replaced due to failures. They are a rare sight today.
__________________

582, 682, 782, 782D, 1282, 1050, 1210 x 2, 1711, and 1811
Reply With Quote
  #6  
Old 06-03-2022, 09:33 AM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Grand Member
 
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 1,073
Default

Quote:
Originally Posted by 1711Cub View Post
The KT17 Series I were installed in Chassis Serial Numbers below 726124.

The KT17 Series II were installed in Chassis Serial Numbers above 726125.

Obviously, almost all the Series I have been replaced due to failures. They are a rare sight today.
Thanks -- it would seem this has been replaced. I saw it has the holes in the tin and blockoff on the block for the remote filters...I wonder if my M18 spare ones would bolt right up.

I sold the conversion kit I had back when my other Series II launched a rod. Certainly this one shipped with a Series I, then, but must have been replaced before Magnums were a popular replacement.
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote
  #7  
Old 06-03-2022, 11:18 AM
1711Cub's Avatar
1711Cub 1711Cub is offline
Senior Member
 
Join Date: May 2020
Location: Elkland, PA
Posts: 741
Wink

The M18 Oil filter bosses will fit the KT17 series II's so equipped with the provisions. Unfortunately, not all Series II's had oil filter provisions!
__________________

582, 682, 782, 782D, 1282, 1050, 1210 x 2, 1711, and 1811
Reply With Quote
  #8  
Old 06-03-2022, 02:06 PM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Grand Member
 
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 1,073
Default

Quote:
Originally Posted by 1711Cub View Post
The M18 Oil filter bosses will fit the KT17 series II's so equipped with the provisions. Unfortunately, not all Series II's had oil filter provisions!
I saw this one had the block off plate and the holes in the shroud for it. I'm not sure what else would be needed besides maybe adding a hole in the firewall (will compare to 1811 mounting).

Probably a value-added improvement.
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote
  #9  
Old 06-03-2022, 04:57 PM
1711Cub's Avatar
1711Cub 1711Cub is offline
Senior Member
 
Join Date: May 2020
Location: Elkland, PA
Posts: 741
Lightbulb

My 682 has the M18 with the remote oil filter added to the firewall. I drilled a couple of holes to snugly fit it under the fuel tank. I trimmed the firewall to hood/side panel seal to accommodate the flexible oil lines.
__________________

582, 682, 782, 782D, 1282, 1050, 1210 x 2, 1711, and 1811
Reply With Quote
  #10  
Old 06-03-2022, 07:08 PM
Farmall450's Avatar
Farmall450 Farmall450 is offline
Grand Member
 
Join Date: Oct 2018
Location: Marengo, Illinois
Posts: 1,073
Default

Quote:
Originally Posted by 1711Cub View Post
My 682 has the M18 with the remote oil filter added to the firewall. I drilled a couple of holes to snugly fit it under the fuel tank. I trimmed the firewall to hood/side panel seal to accommodate the flexible oil lines.
I'll give it a shot once it proves to be worthy.

Treated the 782 & 984 to new gas caps. Stens 125-280 shows Made in USA, amazingly.

Attached Images
File Type: jpg Stens 125-280.jpg (30.4 KB, 148 views)
__________________
Why Farm Half When You Can Farmall?
1282 | 44C Deck, Chains, 42" Blade, Cast Weights, 020" Over K301 * 1711 | 50C Deck, #1 Rear Rototiller w/ Extensions, Sleeve Hitch, KT17S Series II 24302 --> CH18S * 1811 | 46 GT Deck, 42" Blade, Chains, M18 Magnum, Sleeve Hitch * 1782 | 60" #375 Deck, Kubota D640 Diesel * 1862 | #450 Snowblower, M18 Magnum * 782 | Y/W KT17 Series II, Sleeve Hitch * 984 | Y/W Onan/Linamar 20HP, Sims Cab, CAT 0 3 PT w/ Rear PTO, 60" #374 Deck
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:03 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.