|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
11-29-2009, 07:38 PM
|
|||
|
|||
anyone seen this before???
This is a pic of my 70s steering housing...Dont think I can revive this one..I was in the process of taking it off the tractor to rebuild and found this..Pics not great but at some point this thing came apart on the inside and shoved the bearing out through the casting on the housing....you can see the bearing pushing out of the hole in the casting....I honestly think I can fix this one but dont think its worth the trouble...Let me know what you think....
|
|
#3
11-29-2009, 09:44 PM
|
|||
|
|||
|
yep it still worked ...had a lot of slop in it... thats the way it was when we got it.....
|
|
#4
11-29-2009, 11:01 PM
|
|||
|
|||
|
It looks like it's starting to spider web around the hole, and it appears that there is a crack started around the circumference about where the top of the plug is. Might be a difficult fix.
|
|
#5
11-29-2009, 11:21 PM
|
|||
|
|||
|
Yep it will be a tough one....I cant believe it was not locked up after I got it out and looked at it....I'll try to tear it down and clean it up tomorrow and see what the shaft looks like inside and how many bearings are left....lol...Ran out of day light .....story of my life...lol....
|
|
#6
11-30-2009, 06:21 AM
|
|||
|
|||
|
I have seen posts worst. Water can get down there from sitting outside and then freeze. From what I can see (the eyes are not as good as they use to be)
you can either patch this one up, or replace it with a new or used one.
__________________
Roland Bedell CC Models: 100, 105, 1450, 782, (2) 784, & 2072 Buy: Made in the USA 
|
|
#7
11-30-2009, 11:26 AM
|
|||
|
|||
|
I didnt think about water getting down there but that would sure do it..I have another sector out of a 147 the only difference I can see is that that tube is shorter in my 70....Does anyone know if the tubes are pressed in the cam follower housing.?If so I might take the guts out the 70's change the tubes and put the 70s guts in it...Has anyone done this? thanks for the input....Randy
|
|
#8
11-30-2009, 11:43 AM
|
|||
|
|||
|
Don't know about your tractor but in the quietlines it is really common for the tube to be loose and floating....and you need to expand the tube for a press fit when rebuilding.
__________________
Quietlines and narrow frames, mostly projects but I mow with a 1200 and have a 122 set up for pulls. Wandering the country bringing towers to wind farms everywhere, and bringing yellow stuff home to Texas. Also into flatfender jeeps.
|
|
#10
11-30-2009, 02:06 PM
|
|||
|
|||
|
the 70 I got a short time ago to be my first true restoration has the steering box broken in 2 pieces. The bottom and half of one side are broken off in one pieces on the diagonal !I'll try to get some pics once the rain stops here.This tractor is in bad shape something other guys might use as parts but for me I want it for the learning curve it will provide.I can't believe I'm saying this but I'll buy better projects later!
|
|
| Thread Tools | |
| Display Modes | |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
