PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Filling tires
Do you need to use tubes or not when filling tires with liquids
|
#2
|
||||
|
||||
This is a hot button topic and you will get a bunch of different opinions. That said, all my tires are filled with washer fluid and are tubeless, the oldest set has been that way for 6yrs and so far there are no issues but the wheels were sandblasted and painted and the tires were new, not sure how well it would seal with an old tire on a rusty rim.
__________________
Tim Pap's 100 Restored 108 1211 Dual Stick 1050 Pap's 100 restoration thread - http://onlycubcadets.net/forum/showthread.php?t=47965 |
#3
|
|||
|
|||
I prefer tubes when loading tires, but there is nothing wrong with loading them tubeless. Even big tractors, they do it both ways. It really is up to the owner. I use CaCl2, so I want a tube.
|
#4
|
|||
|
|||
Thanks guys.figure I'll do without the tubes if something doesn't work I can always pump most of the fluid back out.
|
#5
|
|||
|
|||
With tubes, you can pump it ALL back out.
|
#6
|
||||
|
||||
I spoke with a tire salesman for Miller Tire and he said that some guys will finely shred old shop rags up and put them in the tires, then the fluid and then the air. He said then if ever the tire gets a puncture, the finely shredded rags fill the hole and the pressure from the air inside keep them forced into position. He also mentioned some kind of powder, too.....I want to say flour, but I am not for sure, which does the same thing. I have never tried it, but I have bought many tires from this fella and he seemed well versed, so I listened with an attentive ear.....just sorry that I don't remember the powder he mentioned.
Cub Cadet 123
__________________
Still don't know what I'm doing in OHIO?.....If you find me, then please point me back toward INDIANA. |
#7
|
||||
|
||||
Never heard of doing that.
I suppose then you could add dryer lint, corn starch, black pepper, rad leak sealer, etc. for those possible future leaks. |
#8
|
||||
|
||||
I've done it both ways, with and without tubes. Tubes probably protect the rims from corrosion, but I imagine the rims don't stay dry anyway inside, even with a tube. I have been using windshield washer fluid. As for the powder or lint, or rags, I'd only do that if you want a real mess should you have to dismount a tire. Sounds like a bad idea to me.
__________________
|
#9
|
||||
|
||||
Quote:
I haven't tried this yet. It sounds like a farmer's strategy to use some preventative maintenance. Just a guess..... Cub Cadet 123
__________________
Still don't know what I'm doing in OHIO?.....If you find me, then please point me back toward INDIANA. |
#10
|
|||
|
|||
I wouldn't put anything in there with the fluid. It wouldn't stop a leak anyway. Oh, maybe a pinhole, but not one from a black locust thorn, or a 16 penny nail.
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.