Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Speciaalties R. F. Houtz and Sons

Patton Acres IH Cub Cadet Parts

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > Cub Cadet Engines > Kohler Engines

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 03-30-2019, 04:47 PM
dodge trucker dodge trucker is offline
Senior Member
 
Join Date: Jul 2016
Location: Illinois
Posts: 639
Default K161 differences?

My son has an original, that has been taken apart, blasted, repainted and reassembled. We got it all in pieces to begin with. The engine was off of the tractor at that time. So I went through the carb, put new points and condenser in, and bench fired it. it started and sounded pretty decent so we just cleaned it up, painted it and reinstalled it. Since we have had the tractor all back together, I can tell that the engine is TIRED. He wants to rebuild it. I say no problem, as long as we can get the parts that we would need to do the job.

I remember seeing both wanted and for sale ads on here,
and any time a k161 comes up, someone will ask along the lines of "for an original or for a 70/71/72 etc?"
I have come across a k161 that I can buy for less than the price of parts for this engine, and I want to check it out. It is off of a 1967/68 ish wheel horse Indy 500 version. It has been rebuilt and put on to a shelf. I know, rebuilt doesn't mean the same thing to everybody. The seller has offered to let me pull the head and pan off for a look before I buy. So that sounds promising. This is just a long block and flywheel.No sheet metal, starter or carb. My thoughts are to swap those things off the existing engine and drop it in, so that he can use it while I go thru the original engine. A temporary engine if you will. So with that being said, other than the crank diameter, what other features of the short block are peculiar to the original? He also has a 73 that I haven't looked at yet to see if it may be runnable. Maybe put this on there eventually. What difference is there in a k161 used between these two tractors?

I have been caught up in swapping engines that were the same brand and model over the years but wound up being quite a bit different from each other, with more parts swapping between them than I expected. So this time I thought I would ask before I go after this rebuilt engine.
Reply With Quote
  #2  
Old 03-30-2019, 05:30 PM
darkminion_17's Avatar
darkminion_17 darkminion_17 is offline
Grand Member
 
Join Date: Aug 2010
Location: New Jersey
Posts: 10,984
Default

Any spec numbers on the 500 special motor? Does the dipstick come out the top like a Cub Cadet, or does it screw in?
You may have to change the bearing plate on the WH one when you want to use the Cub flywheel. Muffler may be an issue if the block has no threads for a nipple.
You will have to change the oil pan.
__________________
Up to 530 and counting...
I give up updating my profile!
Reply With Quote
  #3  
Old 03-30-2019, 05:42 PM
dodge trucker dodge trucker is offline
Senior Member
 
Join Date: Jul 2016
Location: Illinois
Posts: 639
Default

The flywheel looks like the same thing in the pix that I have. The dipstick screws into the block, has a pipe plug kind of a top to it. For any other Q's I'm going to have to go back to the pix which means I gotta get off of here to see them again. Swapping out pans is no biggie, have to play musical oil pans on my other brand machines too (Ariens) with a k 301-k341 so why would I expect anything less in this case.... Haha. I can borrow the pan from the engine on the original now and for now. No spec numbers available at present from the wh engine.
Reply With Quote
  #4  
Old 03-30-2019, 05:53 PM
darkminion_17's Avatar
darkminion_17 darkminion_17 is offline
Grand Member
 
Join Date: Aug 2010
Location: New Jersey
Posts: 10,984
Default

Makes it kinda hard to check the oil when the S/G is on the motor.
The back of the flywheel is what is different.
Is the block tapped for the s/g belt adjuster?
__________________
Up to 530 and counting...
I give up updating my profile!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:43 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.