Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Speciaalties R. F. Houtz and Sons

Patton Acres IH Cub Cadet Parts

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > Cub Cadet Rear Engine Rider & ZTR (RER)

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 05-22-2021, 10:21 PM
kentross81 kentross81 is offline
New Member
 
Join Date: Apr 2021
Location: NY
Posts: 3
Default Traction: ZT1 vs ZT2?

I have a 42" ZT1 which I really like, however our 2-3 acre mowable area has a serious slope to it.

I have to be very careful not to rip up the grass when turning or stopping, and even when dry it is easy to slide (1 wheel not turning, a skid).

While mowing across the hill (recommended safest way) the back end will slip down the slope a few inches at times in a couple areas.

Obviously our lot isn't right for a ZT, a conventional tractor would be better- sorry, I am a ZT guy!

Does the ZT2 have better traction, or worse? I bought the ZT1 thru Home Depot, and have the ability to return it for full credit, to hopefully get a ZT2 from them. Just a matter of.... is it worth it.... a lot more cost.

If the traction is better, and I won't rip up my lawn as easily, I need to think about it.

Thanks for any help.
Reply With Quote
  #2  
Old 05-23-2021, 05:49 AM
bugeye bugeye is offline
Senior Member
 
Join Date: Jun 2013
Location: Reading, PA
Posts: 292
Default

While I have no experience with a ZT, I do experience some traction issues with my garden tractors. I have found the tire tread will have an effect on sliding sideways when mowing across the slope. Suggest comparing tire size, tread width and tread aggressiveness. I run wheel weights for mowing and snow removal.
__________________
1863, 1864, 48" and 54" mower decks, 54" snow plow, 451 snow blower, TracVac 580
Reply With Quote
  #3  
Old 05-25-2021, 07:23 PM
guyina4x4's Avatar
guyina4x4 guyina4x4 is offline
Senior Member
 
Join Date: Sep 2017
Location: IL
Posts: 270
Default

I doubt it would make any difference. Zero turns suck on hills.
They all do.
__________________
JD x475
Reply With Quote
  #4  
Old 06-06-2021, 12:56 AM
GregBert70 GregBert70 is offline
New Member
 
Join Date: May 2021
Location: OH
Posts: 6
Default 12" tires vs. 8" tires

The 12" tires of the ZT2 would obviously be better than the 8" tires on the ZT1. This brings up a question I myself have had. I had my heart set on a ZT2-50, due mainly to the serviceable hydros...but they just cannot be found- not here in Ohio anyway. I have thought about putting the 12" tires and wheels from the ZT2 on my ZT1, but then I thought- would the increased traction from the 12" tires put more strain on the non-serviceable hydros? Or, is it simply an upgrade that would have no bearing on installing them on a ZT1. The serviceable hydros, the 12" tires, and the arm rests were why I really wanted the ZT2. I don't care much about the larger front tires, or the wider strip of steel welded to the leading edge of the deck.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:32 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.