Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > IH Cub Cadet Tractors (GT)
Reload this Page Clutch Pressure plate issue
Register FAQ Calendar

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 09-16-2022, 09:53 PM
Merk Merk is offline
Grand Member
  
Join Date: Mar 2009
Location: Ohio
Posts: 2,182
Default Clutch Pressure plate issue
I was rebuilding a narrow frame clutch assembly. Something didn't look right when everything was apart. Needless to say the pressure plates are warp big time. The hubs from pressure plates are butted against each other. There is a .040 to .060 gap ( where my finger is pointing ) at the outer edge. The drive shaft coupler was loose. Not sure if the bolts holding the motor were tight.
Owner says tractor was working ok.
Anyone have any thoughts on why the discs were like this?
Attached Images
File Type: jpg clutch pressure plate 1.jpg (18.2 KB, 83 views)
__________________
Project Uncle Dick
Cub Cadet 70
http://www.onlycubcadets.net/forum/s...ght=Uncle+Dick
Reply With Quote
  #2  
Old 09-17-2022, 05:57 AM
R Bedell R Bedell is offline
Administrator
  
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default
IMHO, looks like the Owner ran this tractor way too long, creating heat, with what "he" thought was normal??


__________________
Roland Bedell

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

Buy: Made in the USA
Reply With Quote
  #3  
Old 09-17-2022, 06:14 AM
finsruskw finsruskw is offline
Grand Member
  
Join Date: Mar 2013
Location: Iowa
Posts: 2,990
Default
Abuse and neglect come to mind here although the coupler slot portion of the rear plate looks good, much better than many I have seen.

That gap looks closer to .100 from here.
Was the disc itself an OEM style w/the metal center plate?

What's the ID of the hubs on the plates and the rear coupler?
All wallowed out?

What's the OD of the shaft in those areas of wear, front and rear?
Groovy?

Looks like it's time for some new parts!
Reply With Quote
  #4  
Old 09-21-2022, 01:53 PM
Merk Merk is offline
Grand Member
  
Join Date: Mar 2009
Location: Ohio
Posts: 2,182
Default
Quote:
Originally Posted by finsruskw View Post
Abuse and neglect come to mind here although the coupler slot portion of the rear plate looks good, much better than many I have seen.

That gap looks closer to .100 from here.
Gap measured .140.

Clutch assembly was in a IH Cub Cadet 73 with a stock engine.

Quote:
What's the ID of the hubs on the plates and the rear coupler?
ID of plates was .630.
Coupler ID .638 -.631

Quote:
What's the OD of the shaft in those areas of wear, front and rear?
Drive shaft OD trans end was .610.
Pilot bushing end that goes into 3 pin driver .610

Quote:
Was the disc itself an OEM style w/the metal center plate?
OEM style with a metal plate
__________________
Project Uncle Dick
Cub Cadet 70
http://www.onlycubcadets.net/forum/s...ght=Uncle+Dick
Reply With Quote
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 04:19 PM.

www.onlycubcadets.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.