Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Speciaalties R. F. Houtz and Sons

Patton Acres IH Cub Cadet Parts

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > Home Made

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 02-24-2021, 12:44 AM
That_cub_dude1847 That_cub_dude1847 is offline
Member
 
Join Date: Jun 2020
Location: Pennsylvania
Posts: 78
Default Homemade Cub Cadet Original Lights

I am looking to install lights to my cub cadet original. However, the original lights are way overpriced and I am looking to use my original as a genuine workhorse. Anyone know how I can install a pair of lights of my own?

P.s. I'm sorry if I sound dumb at all, I just got into restoring old tractors and dont know much about electrics and stuff
Reply With Quote
  #2  
Old 02-24-2021, 06:52 AM
R Bedell R Bedell is offline
Administrator
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

The reason for the high price on the Cub Cadet Original lights is because they are getting more hard to find, as time goes. The tractor is 60+ yrs old. The Grote rear tail light is NLA. The head light assembly was also used on the IH 101 Combine and that my offer resources for you. But the mounting brackets were different.

As for just general lights, maybe some Angle Iron, and whatever you can find at a Auto or Tractor Supply store.
__________________
Roland Bedell

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

Buy: Made in the USA
Reply With Quote
  #3  
Old 02-24-2021, 07:26 AM
ol'George's Avatar
ol'George ol'George is online now
Grand Member
 
Join Date: Oct 2009
Location: MI
Posts: 6,610
Default

Just throwing this out there.
When mounting lights try to not "cobble" something up as far as drilling holes in the sheet metal or other places. try to find existing holes or mounting places.
As Roland says, they are 60 yrs old and becoming somewhat of a collector to those that like them.
There are LED lights available that are inexpensive and consume little current.
Just 2 wires and a hardware switch, and you "light up yer life"
Reply With Quote
  #4  
Old 02-24-2021, 09:03 AM
That_cub_dude1847 That_cub_dude1847 is offline
Member
 
Join Date: Jun 2020
Location: Pennsylvania
Posts: 78
Default

Quote:
Originally Posted by ol'George View Post
Just throwing this out there.
When mounting lights try to not "cobble" something up as far as drilling holes in the sheet metal or other places. try to find existing holes or mounting places.
As Roland says, they are 60 yrs old and becoming somewhat of a collector to those that like them.
There are LED lights available that are inexpensive and consume little current.
Just 2 wires and a hardware switch, and you "light up yer life"
Oh ya definitively, I don't want to drill holes in places I don't have to. And if I must, I might buy a new grill just to drill the holes into.
Reply With Quote
  #5  
Old 02-24-2021, 04:01 PM
bill682 bill682 is offline
Senior Member
 
Join Date: Oct 2011
Location: IN
Posts: 252
Default

The head light option for the Original was installed at the dealer or owner installed. It involved drilling holes in the grille surround and pedestal for the switch. There were instructions with the package from IH. It shouldn't be hard to find lights and a switch that would be good enough for a working tractor.
Reply With Quote
  #6  
Old 02-26-2021, 06:06 AM
Bryan S Bryan S is offline
Senior Member
 
Join Date: Nov 2020
Location: Lancaster, PA
Posts: 159
Default

Also just throwing an option. As mentioned, yes to the LED lights, and a rocker switch, easy peasy. I would recommend a set of pod,
or a small LED bar. Tractor supply has some nice ones. I have their 30" LED bar to go on the top of my 45" snow thrower on the 2182. Going to mount the LED bar on a piece of flat stock, and use a pair of un-godly strong neodymium magnets to hold it in place. And I say this with the utmost confidence that it would take a serious/catastrophic event for the bar to move. The ones I have you do not want them even getting close to each other. If they got close enough and come together. It would not be good for me, and the magnets would be destroyed.
No holes to drill, and you can make them plug and play. You could take them off and use on
another tractor if needed. HTH

Here's a link for the magnets. So many to choose from. https://www.magnet4less.com/neodymiu...be-bar-magnets

A link to TSC for some LED lights, They put them on sale quite often. https://www.tractorsupply.com/tsc/se...20light%20bar?
__________________
The Cub Pack. 70, 100 (creeper), 104, 122 (2), 1250, 1810, 1863, 2182, LTX 1050, SLTX 1050, SLT 1550, SLT 1554, Snow Chuckers 450, 451, 826T, 1030E, 2 plow blades. always looking for "just one more"
Reply With Quote
  #7  
Old 03-04-2021, 10:16 AM
jims129 jims129 is offline
New Member
 
Join Date: Feb 2017
Location: Ontario
Posts: 1
Default Cc lights

Search for
Cub cadet origional lights instructions.

It will show where to drill holes in the side of the grill.
Flatten and bend pipe for mounts
You can use newer tractor lights til you find origionals
Jim
Reply With Quote
  #8  
Old 05-23-2021, 02:00 AM
jcubtroy's Avatar
jcubtroy jcubtroy is offline
Senior Member
 
Join Date: Oct 2018
Location: Pennsylvania
Posts: 123
Default

i would put a fuse in the circuit.
Reply With Quote
Reply

Tags
lights

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:38 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.