PLEASE PATRONIZE OUR SPONSORS!
#11
|
|||
|
|||
I’m guessing that simply replacing the friction disc may not be considered a thorough job. Truing up or dressing the corresponding surfaces on the clutch and or pressure plates would also be in order would be my guess. Would anyone be able to provide me with what might be considered “ out of service” dimensions for the thickness of the two items that might need to be chucked in the lathe?
|
#12
|
|||
|
|||
So it looks like this is where I am currently at in the parts department:
New rag joint New ball bushing for transmission input yoke New friction disc And as far as my trip to see my good friends at the machine shop; Turn the pressure plates Anything else?... |
#13
|
|||
|
|||
Oh, sorry, wrong picture.
|
#14
|
||||
|
||||
Here is a link to the clutch from Part Tree.
http://www.partstree.com/parts/?lc=c...&dn=0017500012
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
#15
|
|||
|
|||
I truly appreciate your quick response Mr Sam Mac. And what a reasonable cost of just $50.26! I'm thinking that while I have this all apart, I may consider replacing the through out bearing in the process. I did see in the owners manual that some of the drive shafts had a grease fitting. Does anyone know if that is for the throughout bearing?
|
#16
|
||||
|
||||
I can't say for sure, I've never owned a 1200. I'm sending you a PM for a place with better pricing than Parts Tree.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
#17
|
|||
|
|||
Did I say throwout bearing?
Heading out to shovel out the mother inlaw, check back in latter, Thanks! |
#18
|
||||
|
||||
Some good reading for you.
Service manual http://www.onlycubcadets.net/forum/s...ead.php?t=4644 Clutch rebuild how to http://www.onlycubcadets.net/forum/s...ad.php?t=33653
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
#19
|
|||
|
|||
While you are into it, inspect the 3 pin clutch driver for cracks.
This is what is bolted to the end of the crank w/4 short 1/4" bolts. They are still available but NOT CHEAP! If it badly cracked, it will likely soon fail. You only want to do this once so do it right. Good luck! |
#20
|
|||
|
|||
Will do Mr finsruskw, I'll go out and check it out right now.
|
Tags |
clutch, cub cadet 1200 quietline, rag joint |
Thread Tools | |
Display Modes | |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.