![]() |
PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools
![]() |
Display Modes
![]() |
|
#1
|
|||
|
|||
![]()
Hey everyone, I have been a member for a while, but haven't made any posts yet (or at least I don't think I have).
I used to do garden tractor pulls as a kid, and towards the end of that time, my father finally got two Cub cadets to use a 108 and a 126. Once I moved out years later, i took the tractors with me to mess with and try to get them back to working condition (yard working condition). I have worked on many projects over the years: Airplanes, FJ40 Landcruiser, S10 Pickup, and a fleet of Motorcycles....now I am finally getting the cubs running. So I had to rebuild the PTO on the 126 and I haven't really found a definite answer out there...I know it is on the forums here somewhere.... 1) Is that the correct spring on the PTO for a narrow frame? or can it be used? 2) It seems those style springs always come in 2's, should I have used two? 3) On this style of PTO, when using the tool to set the tension (per the manual) Should the tool be setting on the same surface that spring is on (outter most) or should it be setting in the recessed lip (where the throwout arms are)? The manual even shows a picture of this Narrow Frame style PTO pulley with both styles of springs installed. I will keep searching the forums for a better answer, but I know someone is much more experienced with this than I am. I want to avoid necessary wear or breakage if I can. IMG_0853.jpg IMG_0858.jpg IMG_0859.jpg IMG_0860.jpg Thanks in advance for any help. Kevin |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.